cannot configure vlans and VTP

Moderator: mike

Locked
junaid.shah83
Posts: 3
Joined: Fri Feb 15, 2019 9:28 am

cannot configure vlans and VTP

Post by junaid.shah83 » Thu Mar 14, 2019 5:17 pm

Hello,

I need help in configuring vlans and vtp on IOL switches, i do not even see that option. Can someone please assist and let me know if i am missing anything here. I am using below IOS. Thansk in advance

IOS = i86bi-linux-l3-adventerprisek9-15.4.2T.bin
i86bi-linux-l2-ipbasek9-15.1g.bin

Uldis (UD)
Posts: 2661
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: cannot configure vlans and VTP

Post by Uldis (UD) » Fri Mar 15, 2019 8:06 am

First image is not switch at all!
IOS = i86bi-linux-l3-adventerprisek9-15.4.2T.bin
IT IS Router, and simply cannot have VLANs or VTP.

Second looks like is is Switch image, but you have to make sure if you are set proper image for node in lab use.

Uldis

sabboja
Posts: 2
Joined: Fri Dec 14, 2018 1:07 am

Re: cannot configure vlans and VTP

Post by sabboja » Thu Mar 21, 2019 3:35 am

I am not sure which image you are using, however i am using "i86bi-linux-l2-adventerprisek9-15.2d" and it worked fine for me.


Switch(config)#vtp ?
domain Set the name of the VTP administrative domain.
file Configure IFS filesystem file where VTP configuration is stored.
interface Configure interface as the preferred source for the VTP IP updater
address.
mode Configure VTP device mode
password Set the password for the VTP administrative domain
pruning Set the administrative domain to permit pruning
version Set the administrative domain to VTP version

Switch(config)#vlan ?
WORD ISL VLAN IDs 1-4094
access-log Configure VACL logging
access-map Create vlan access-map or enter vlan access-map command mode
accounting VLAN accounting configuration
configuration vlan feature configuration mode
dot1q dot1q parameters
filter Apply a VLAN Map
group Create a vlan group
internal internal VLAN

Uldis (UD)
Posts: 2661
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: cannot configure vlans and VTP

Post by Uldis (UD) » Thu Mar 21, 2019 3:07 pm

closed

Please use proper images for you lab nodes..

Uldis

Locked