The xrv9k image comes with an OVA disk1.vmdk and also a .qcow2 image.
Which image should be used?
I can covert the .vmdk into a qcow2 image or just remain the .qcow2 to virtioa.qcow2.
Thank you
xrv9k - instructions
Moderator: mike
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: xrv9k - instructions
use original qcow2 better
-
- Posts: 5
- Joined: Wed Nov 15, 2017 6:36 am
Re: xrv9k - instructions
Using the 6.2 qcow2 image I get the following result - is there any QEMU specific option required?
################################################################################
# #
# Welcome to the Cisco IOS XRv9k platform #
# #
# Please wait for Cisco IOS XR to start. #
# #
# Copyright (c) 2014-2017 by Cisco Systems, Inc. #
# #
################################################################################
Cisco IOS XR console will start on the 1st serial port
Cisco IOS XR aux console will start on the 2nd serial port
Cisco Calvados console will start on the 3rd serial port
Cisco Calvados aux will start on the 4th serial port
[ 18.704752] reboot: Restarting system
KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000206d7
################################################################################
# #
# Welcome to the Cisco IOS XRv9k platform #
# #
# Please wait for Cisco IOS XR to start. #
# #
# Copyright (c) 2014-2017 by Cisco Systems, Inc. #
# #
################################################################################
Cisco IOS XR console will start on the 1st serial port
Cisco IOS XR aux console will start on the 2nd serial port
Cisco Calvados console will start on the 3rd serial port
Cisco Calvados aux will start on the 4th serial port
[ 18.704752] reboot: Restarting system
KVM: entry failed, hardware error 0x7
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000206d7
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: xrv9k - instructions
stop node and start
on first boot it install itself...
on second boot must come up...
on first boot it install itself...
on second boot must come up...
-
- Posts: 5
- Joined: Wed Nov 15, 2017 6:36 am
Re: xrv9k - instructions
Thanks - after second boot it's working.