Dear support, my pnet interfaces doesn't seem to be passing traffic all the times. For instance, I added a pnet interface to a docker instance and ran wireshark. I noticed that my traffic was exiting eve-ng and hitting my firewall. Firewall replied back to the DHCP discover with an IP address but I am not able to see the return traffic.
Some times I noticed that I am able to get an IP address but cannot pass traffic.
Is there any way to reset the pnet interfaces back to factory default?
Please advise.
pnet interface Issues
Moderator: mike
-
Uldis (UD)
- Posts: 5083
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: pnet interface Issues
Please details what you did there...
Because such troubles are not observed
Because such troubles are not observed
-
priyanshuz
- Posts: 20
- Joined: Fri Oct 25, 2019 8:31 pm
Re: pnet interface Issues
I am having the same issue as viewtopic.php?f=3&t=3339&p=7940&hilit=cloud0#p7940
I do have everything correctly setup on the ESXi side. Not sure how to resolve it. If I wait long enough then everything starts to work automatically.
I do have everything correctly setup on the ESXi side. Not sure how to resolve it. If I wait long enough then everything starts to work automatically.
-
priyanshuz
- Posts: 20
- Joined: Fri Oct 25, 2019 8:31 pm
Re: pnet interface Issues
Is it possible the linux bridge is dropping the return traffic (possible arp spoofing).