Page 2 of 2
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Wed Nov 04, 2020 1:58 am
by KrezMan
Will do. Thanks for letting me know though. I'll head over there now.
-K
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Wed Nov 04, 2020 8:57 am
by Uldis (UD)
Well, my favorite vQFX is vers 18.
Before start configure vQFX I do clean them out first, every vQFX RE:
wildcard range delete interfaces xe-0/0/[0-71]:[0-3]
wildcard range delete interfaces xe-0/0/[0-71] unit 0
wildcard range delete interfaces et-0/0/[0-71]
wildcard range delete interfaces et-0/0/[0-71] unit 0
and then configure interfaces
set interface xe-0/0/0 unit 0 family inet address 10.1.1.1/24
See mu screen below
P.S. btw vers 20 is buggy, if you issue sh version on vQFX 20, it will show you vers 19 inside
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Mon Nov 23, 2020 11:37 am
by rajputaman04
I did in the image above for the xe-0/0/0 on each RE box, or did you mean show interface terse for all the interfaces?
get-mxplayer.in
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Tue Nov 24, 2020 12:24 pm
by seanachai
I have QFX running OK on 19.R4, so if still stuck ping me and I can advise on my setup...
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Tue Nov 24, 2020 9:30 pm
by Uldis (UD)
My best preffered is version 18.4 of vQFX
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Sat May 22, 2021 5:05 pm
by akan
hey was this ever resolved? I am facing the same problem and I am on version 17.4R1-16. I can even see ARP OK from both sides, packet capture shows ICMP exchange correctly, but ping is just not working!
Re: Fresh vQFX Evironment - Running but forwarding seems broken (Ping)
Posted: Mon Jul 26, 2021 11:40 am
by dogzop
What version of 19.x release are you using and did you use the qcow2 and .img file?