viptela Vmanage turning off after 3 sec
Post by hassan2go » Tue Dec 22, 2020 4:40 pm
Hi, #
My vmanage tries to load but turns off just after few seconds.
i am using image "vtmgmt-19.2.0" , I have renamed folders and all files as suggested in the document.
i have checked and enabled VTx on my server by going in to bios. i am using HP z620 as my exsi host.
Vedge, vbond and vsmart works fine
Please assist.
Thanks
viptela Vmanage turning off after 3 sec
Moderator: mike
-
- Posts: 33
- Joined: Mon Mar 19, 2018 2:45 pm
Re: viptela Vmanage turning off after 3 sec
found the solution.
no issue with the configuration.
all i did was changed the CPU to 2, RAM to 8192 (basically put into half from default)
no issue with the configuration.
all i did was changed the CPU to 2, RAM to 8192 (basically put into half from default)
-
- Posts: 5081
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: viptela Vmanage turning off after 3 sec
Please type on your eve CLI as root, it must show:
kvm-ok
kvm-ok
Code: Select all
root@eve-ng:~# kvm-ok
INFO: /dev/kvm exists
KVM acceleration can be used
root@eve-ng:~#