does anyone face that problem in eve-pro 4
c7206 F0/0 is not working even in a very simple P2P topology.
Module PA-FE-TX in F1/0 is working. But all of my old Labs use F0/0.
c7200 F0/0 is not working
Moderator: mike
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: c7200 F0/0 is not working
Guys when you state a problem, always tell which EVE you Have Pro or Community.
In both this Dynamips 7206 is working fine.
Just in eve pro need set 256m ram
In both this Dynamips 7206 is working fine.
Just in eve pro need set 256m ram
-
- Posts: 11
- Joined: Tue Mar 30, 2021 1:11 pm
Re: c7200 F0/0 is not working
Well, i am asking about eve-ng-pro 4, because i am using it.
and NO, c7200 is not working well with F0/0.
You have to add PA-FE-TX in F1/0.
It is not a migrated Lab, it is a new Lab with the default template.
All what i have changed in the template is the idle-pc value because it didn't play well with me.
changed from 0x62f21000 to 0x62f20a04
and NO, c7200 is not working well with F0/0.
You have to add PA-FE-TX in F1/0.
It is not a migrated Lab, it is a new Lab with the default template.
All what i have changed in the template is the idle-pc value because it didn't play well with me.
changed from 0x62f21000 to 0x62f20a04