I have issue on VSR as info below.
Could you please help me fix this issue?
Code: Select all
Total Memory: 2GB Chassis Type: 0x26 Core Freq: f MHz
TiMOS-V-16.0.R5 bootrom/i386 Nokia 7xxx ? Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
Looking for boot parameters.
Press any key to stop auto-boot...
1
auto-booting...
boot device : ata=0,2
unit number : 0
processor number : 0
host name : 0.0.0.0
file name : cf3:/timos/i386-boot.tim
ftp password (pw) : *****
flags (f) : 0x8
target name (tn) : VSR-I
startup script (s) : pl=1
other (o) : vsr-c#vsr_cpm,vsr_iom|158|0|0|0
Booting from ata=0,2:cf3:/timos/i386-boot.tim
Loading cf3:/timos/i386-boot.tim ...
Version L-16.0.R5, Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
text:(1940992-->5202320) + data:(285888-->1414896)
Starting at 0x30000000...
(s) boot params: pl=1; setting TgtPf to 0x00000001
KVM based vcpu
Running in a KVM/QEMU virtual machine
ACPI: found 2 cores, 2 enabled
Total Memory: 2GB Chassis Type: 0x1f Core Freq: 2208.000 MHz
TiMOS-L-16.0.R5 boot/i386 Nokia 7750 SR Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
TiMOS BOOT LOADER
Time from clock is SAT JAN 19 19:25:14 2019 UTC
Switching serial output to sync mode... done
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
primary-image cf3:\timos\i386-both.tim
primary-config cf3:\config.cfg
autonegotiate
duplex full
speed 100
wait 3
persist off
no li-local-save
no li-separate
console-speed 115200
Contents of Boot Options File (including bios product data)
primary-image cf3:\timos\i386-both.tim
primary-config cf3:\config.cfg
address 1.1.1.1/24 active
autonegotiate
duplex full
speed 100
wait 3
persist off
no li-local-save
no li-separate
console-speed 115200
Hit a key within 1 second to change boot parameters...
Primary image location: cf3:\timos\
Loading image cf3:\timos\i386-both.tim
Version B-16.0.R5, Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
text:(75224704-->255519600) + data:(42061312-->163811056)
No license file specified
Executing TiMOS image at 0x14C000
KVM based vcpu
Running in a KVM/QEMU virtual machine
ACPI: found 2 cores, 2 enabled
6 virtio net devices are detected
Total Memory: 2GB Chassis Type: 0x1f Core Freq: 2208.000 MHz
TiMOS-B-16.0.R5 both/x86_64 Nokia 7750 SR Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
___ ___ ___ ___
/\ \ /\__\ /\ \ /\ \
\:\ \ ___ /::| | /::\ \ /::\ \
\:\ \ /\__\ /:|:| | /:/\:\ \ /:/\:\ \
/::\ \ _\/__/ /:/|:|__|__ /:/ \:\ \ _\:\~\:\ \
/:/\:\__\ /\__\ /:/ |::::\__\ /:/__/ \:\__\ /\ \:\ \:\__\
/:/ \/__/ /:/ / \/__/~~/:/ / \:\ \ /:/ / \:\ \:\ \/__/
/:/ / /:/ / /:/ / \:\ /:/ / \:\ \:\__\
\/__/ \/__/ /:/ / \:\/:/ / \:\/:/ /
/:/ / \::/ / \::/ /
\/__/ \/__/ \/__/
Running 64 bit architecture
Initializing VMM
Virtual address sharing is disabled
Time from clock is SAT JAN 19 19:26:19 2019 UTC
Initial DNS resolving preference is ipv4-only
SMP: 2 cores available
Attempting to exec primary configuration file:
'cf3:\config.cfg' ...
Executed 0 lines in 0.0 seconds from file cf3:\config.cfg
TiMOS-B-16.0.R5 both/x86_64 Nokia 7750 SR Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
Login: ad031 s 01/19/19 19:26:27.430:
tRootTask: Assertion "boot_cpu_feature_is_supported(CPU_FEATURE_SSE42)" failed
File: /builds/c/160B/R5/panos/pchipsim/vfp_main.cpp Line: 3729 Function: vfp_pchip_init
Message: "VFP requires a CPU that supports the SSE 4.2 instruction set"
Stack Trace:
0x1d70b30, i386StackBackTrace (0x01d70b30) + 0x0
0x1db0f79, stackBackTrace (0x01db0f70) + 0x9
0x1ed7e51, timosAssert (0x01ed7c30) + 0x221
0x7ddfec7, vfp_pchip_init (0x07ddfc80) + 0x247
0x7dbc939, VFP_PCHIP::VFP_PCHIP(unsigned char, bool, EITHER_CONFIG_PTR) [subobject] (0x07dbc910) + 0x29
0x7dbd46f, hwSimNpchipDriverInitialize (0x07dbd3a0) + 0xcf
0x7dbd56d, hwNpchipDriverInitialize (0x07dbd560) + 0xd
0x92aaaf9, pDriverInitialize (0x092aa750) + 0x3a9
0x92ab148, np3chipDriverInitialize (0x092ab130) + 0x18
0x92ee39a, hwRchipChipDriverInitialise (0x092ee250) + 0x14a
0x92ef5b8, hwRchipGlobalChipInitialise (0x092ef330) + 0x288
0x92a77fd, rchipGlobalChipInitialise (0x092a77f0) + 0xd
0x2d1e443, iom_initialize_drivers(unsigned char) (0x02d1e3b0) + 0x93
0x2d54c5d, iom_start_tasks(bool) (0x02d54c00) + 0x5d
0x2d56aba, pnIomMain (0x02d56800) + 0x2ba
0xb3b3e96, pnMainPrivate (0x0b3b099e) + 0x34f8
0xb3b403d, pnMain (0x0b3b4032) + 0xb
0xb3d3e08, usrRoot (0x0b3d39f0) + 0x418
min
System Crash Dump Written - Please run the command
`admin tech-support` and contact your Nokia
support representative.
Rebooting...
Using preloaded VxWorks boot loader at 0x0000000000008000, size 0x0007D000, entrypoint 0x0000000000008010
KVM based vcpu
Running in a KVM/QEMU virtual machine
ACPI: found 2 cores, 2 enabled
Total Memory: 2GB Chassis Type: 0x0 Core Freq: f MHz
TiMOS-V-16.0.R5 bootrom/i386 Nokia 7xxx ? Copyright (c) 2000-2018 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
Looking for boot parameters.
Press any key to stop auto-boot...
0
auto-booting...
boot device : ata=0,2
unit number : 0
processor number : 0
host name : 0.0.0.0
file name : cf3:/timos/i386-boot.tim
ftp password (pw) : *****
flags (f) : 0x8
target name (tn) : VSR-I
startup script (s) : pl=1
other (o) : vsr-c#vsr_cpm,vsr_iom|158|0|0|0
Booting from ata=0,2:cf3:/timos/i386-boot.tim
Loading cf3:/timos/i386-boot.tim ...
Version L-16.0.R5, Fri Dec 21 09:49:09 PST 2018 by builder in /builds/c/160B/R5/panos/main
text:(1940992-->5202320) + data:(285888-->1414896)
Starting at 0x30000000...
(s) boot params: pl=1; setting TgtPf to 0x00000001
KVM based vcpu
Running in a KVM/QEMU virtual machine
ACPI: found 2 cores, 2 enabledsoulless