Bare Metal Install on Older Hardware

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Bare Metal Install on Older Hardware

Post by azaghul33 » Thu Mar 23, 2017 7:16 pm

Hi,
My understanding (and I'm probably wrong) is that some of the newer Intel VT features are only required when running UNL/EVE as a VM under ESXi to allow nested 64-bit VMs to run.
Would EVE work on older virtualization hardware as a bare metal install? So no VM nesting required...have an older Dell T5400 (Xeon 5430 based workstation w/16 cores & 32G RAM) I'd like to re-purpose if possible.
Or just a matter of "try it and see"?

Uldis (UD)
Posts: 5084
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Bare Metal Install on Older Hardware

Post by Uldis (UD) » Thu Mar 23, 2017 7:18 pm

Probably yes, just be sure that you have Intel-VTx support. Other no way

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Re: Bare Metal Install on Older Hardware

Post by azaghul33 » Thu Mar 23, 2017 7:23 pm

Cheers! So the 5430's have VT-x, but not VT-x with EPT...guessing the EPT allows the nesting. Something to try this weekend!

mcat84
Posts: 36
Joined: Wed Mar 22, 2017 6:40 am

Re: Bare Metal Install on Older Hardware

Post by mcat84 » Fri Mar 24, 2017 12:22 am

i am running bare metal on very old ibm server with a xeon 5160 processor (lga 771) ........working fine....
as long as it support VT-x....will just do
(running EVE-NG on top of ESXi will not work on this machine 'coz the processor doesn't support EPT)

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Re: Bare Metal Install on Older Hardware

Post by azaghul33 » Fri Mar 24, 2017 1:40 am

Good to know...there goes my weekend :D

Post Reply