ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

leolima
Posts: 4
Joined: Tue Jul 18, 2017 6:34 pm

ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by leolima » Tue Jul 18, 2017 6:46 pm

Hello Friends,

I am experiencing problems when booting the image nxosv-final.7.0.3.I5.2.qcow2



I followed these instructions:


http://www.eve-ng.net/index.php/documen ... x9k-switch


Image




The displayed error is


Boot Failed. EFI Floppy
Boot Failed. EFI Floppy 1
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0xa0000
Total memory is 0xbee3c000
Sysconf checksum failed. Using default values
WARNING: No BIOS Info found
Sysconf checksum failed. Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no

success
Sysconf checksum failed. Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
Strlen bootflash: is 10
Device bootflash: is Drive 0x81 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 2
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 2


Some help?

ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by ramindia » Tue Jul 18, 2017 7:44 pm

leolima wrote:
Tue Jul 18, 2017 6:46 pm
Hello Friends,

I am experiencing problems when booting the image nxosv-final.7.0.3.I5.2.qcow2



I followed these instructions:


http://www.eve-ng.net/index.php/documen ... x9k-switch


Image




The displayed error is


Boot Failed. EFI Floppy
Boot Failed. EFI Floppy 1
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(0,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(1,1)/ATAPI(1,0,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0xa0000
Total memory is 0xbee3c000
Sysconf checksum failed. Using default values
WARNING: No BIOS Info found
Sysconf checksum failed. Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no

success
Sysconf checksum failed. Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
Strlen bootflash: is 10
Device bootflash: is Drive 0x81 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 2
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 2


Some help?
Just try wipe the node and boot and test.

R!

leolima
Posts: 4
Joined: Tue Jul 18, 2017 6:34 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by leolima » Tue Jul 18, 2017 8:25 pm

Same Error :(

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by Uldis (UD) » Tue Jul 18, 2017 8:46 pm

what CPU model is on your PC??

ecze
Posts: 533
Joined: Wed Mar 15, 2017 1:54 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by ecze » Tue Jul 18, 2017 10:54 pm

loading is very long

You can change qemu option to:

-machine type=pc,accel=kvm -bios /opt/qemu/share/qemu/OVMF.fd -serial mon:stdio -nographic -enable-kvm
Screen Shot 2017-07-19 at 00.57.15.png
And what you see on console is totally normal...

Code: Select all

Trying 192.168.198.43...
Connected to 192.168.198.43.
Escape character is '^]'.
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0x9f000
Total memory is 0x800000
Sysconf checksum failed. Using default values
WARNING:  No BIOS Info found
Sysconf checksum failed. Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no

success
Sysconf checksum failed. Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
 Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
 Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1

Then waiting........

after a while:

Code: Select all

[    2.826648] [1500418291] Error: Could not find mtd devices
init started at Tue Jul 18 22:51:35:512795101   unix time:1500418295
Installing klm_card_index
done
INIT: version 2.88 booting
Installing ata_piix module ... done.
Unsquashing rootfs ...
Installing isan procfs ... done.
Installing SSE module with card index 21099 ... done.
Creating SSE device node 248 ... done.
Loading I2C driver ... done.
Installing CCTRL driver for card_type 29 on a VM without NEED_GEM ... done.
11.44: Interrupt throttling disabled. No cctrl irq detected.
Loading IGB driver ... done.
Not Micron SSD...

Checking all filesystems.Warning: switch is starting up with default configuration

Installing SPROM driver ... IS_N9K done.
IS_SUP:; IS_SC:; IS_FC:; IS_LC:; IS_TOR:y done.
Installing pfmsvcs module with SPROM card index 21099 ... done.
Installing nvram module ... done.
Installing if_index module with port mode 6 ... done.
Installing RNI lcnd ... done
Installing LC netdev ... done
Installing psdev module ... done.
Installing veobc module ... done.
Inserting OBFL module ... done.
Making OBFL character devices
mounting plog for N9k!
Mounting OBFL pstore
Trying to mount cdrom...
Starting OpenBSD Secure Shell server: sshd ... done.
tune2fs 1.42.1 (17-Feb-2012)
Setting reserved blocks percentage to 0% (0 blocks)
flash_erase: error!: /dev/mtdrr
             error 19 (No such device)
flash_erase: error!: /dev/mtdoops
             error 19 (No such device)
Starting portmap daemon...
creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
Saving image for img-sync ...
Loading system software
Installing local RPMS
Patch Repository Setup completed successfully
Creating /dev/mcelog
Starting mcelog daemon
Overwriting dme stub lib
File /etc/shared/localtime does not exist.
INIT: Entering runlevel: 3
Running S93thirdparty-script...
Populating conf files for hybrid sysmgr ...
Starting hybrid sysmgr ...
inserting /isan/lib/modules/klm_cisco_nb.o ... done
2017 Jul 18 22:52:08  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  before access to bkout_cfg  - clis
2017 Jul 18 22:52:09  %$ VDC-1 %$  %USER-2-SYSTEM_MSG: <<%USBHSD-2-MOUNT>> logflash: online  - usbhsd
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-0-SYSTEM_MSG: [    2.826648] [1500418291] Error: Could not find mtd devices  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297632] Initializing NVRAM Block 1  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297640] Initializing NVRAM Block 2  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297656] Initializing NVRAM Block 3  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297725] Initializing NVRAM Block 4  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297870] Initializing NVRAM Block 5  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297891] Initializing NVRAM Block 6  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297958] Initializing NVRAM Block 7  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297963] Initializing NVRAM Block 8  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297991] Initializing NVRAM Block 9  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297999] Initializing NVRAM Block 10  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298006] Initializing NVRAM Block 11  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298018] Initializing NVRAM Block 12  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298023] Initializing NVRAM Block 13  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298030] Initializing NVRAM Block 14  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298055] Initializing NVRAM Block 15  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298062] Initializing NVRAM Block 16  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298080] Initializing NVRAM Block 17  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298398] Initializing NVRAM Block 18  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298402] Initializing NVRAM Block 19  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298543] Initializing NVRAM Block 20  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298569] Initializing NVRAM Block 21  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298573] Initializing NVRAM Block 22  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298719] Initializing NVRAM Block 23  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.371516] hwport mode=6 - kernel
2017 Jul 18 22:52:11  %$ VDC-1 %$ %VMAN-2-INSTALL_STATE: Installing virtual service 'guestshell+'
2017 Jul 18 22:52:14  %$ VDC-1 %$ netstack: Registration with cli server complete
2017 Jul 18 22:52:22  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: ssnmgr_app_init called on ssnmgr up - aclmgr
2017 Jul 18 22:52:28  %$ VDC-1 %$ %COPP-2-COPP_NO_POLICY: Control-plane is unprotected.
2017 Jul 18 22:52:30  %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_GOLDEN: IOFPGA booted from Golden
2017 Jul 18 22:52:30  %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_STATUS: Unable to retrieve MIFPGA boot status
2017 Jul 18 22:52:41  %$ VDC-1 %$ %VMAN-2-INSTALL_STATE: Install success virtual service 'guestshell+'; Activating
2017 Jul 18 22:52:41  %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Activating virtual service 'guestshell+'
2017 Jul 18 22:53:01  %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
Starting Auto Provisioning ...
2017 Jul 18 22:53:05 switch %$ VDC-1 %$ %USER-1-SYSTEM_MSG: SWINIT failed. devid:241 inst:0  - t2usd
Done

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2017 Jul 18 22:53:07 switch %$ VDC-1 %$ %POAP-2-POAP_INITED: [9S45WYK1X91-50:01:00:06:00:07] - POAP process initialized
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [9S45WYK1X91-50:01:00:06:00:07] - USB disk not detected
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ last message repeated 1 time
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [9S45WYK1X91-50:01:00:06:00:07] - POAP DHCP Discover phase started
yes
Disabling POAP
2017 Jul 18 22:53:30 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Successfully activated virtual service 'guestshell+'
2017 Jul 18 22:53:30 switch %$ VDC-1 %$ %VMAN-2-GUESTSHELL_ENABLED: The guest shell has been enabled. The command 'guestshell' may be used to access it, 'guestshell destroy' to remove it.


         ---- System Admin Account Setup ----


Do you want to enforce secure password standard (yes/no) [y]: n
E.
You do not have the required permissions to view the files attached to this post.

leolima
Posts: 4
Joined: Tue Jul 18, 2017 6:34 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by leolima » Wed Jul 19, 2017 5:27 pm

Uldis (UD) wrote:
Tue Jul 18, 2017 8:46 pm
what CPU model is on your PC??


Follows the information of my CPU and my hardware hosting ESXI. Thanks a lot for the help


Image

leolima
Posts: 4
Joined: Tue Jul 18, 2017 6:34 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by leolima » Wed Jul 19, 2017 5:44 pm

ecze wrote:
Tue Jul 18, 2017 10:54 pm
loading is very long

You can change qemu option to:

-machine type=pc,accel=kvm -bios /opt/qemu/share/qemu/OVMF.fd -serial mon:stdio -nographic -enable-kvm

Screen Shot 2017-07-19 at 00.57.15.png

And what you see on console is totally normal...

Code: Select all

Trying 192.168.198.43...
Connected to 192.168.198.43.
Escape character is '^]'.
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(1,800,8000,c48fa7a2-22f0-4149-d4bc-1993e4cf76c1)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(2,8800,a3332,e717d076-a237-41f2-8081-f2c4fe637289)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(3,ac000,146666,79914cb2-73d2-4fb9-1999-b15f771375a6)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(4,1f2800,6b199c,5330e85f-6426-43dd-e986-056152ac5679)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(5,8a4800,146666,aa000172-ffda-4794-9d8e-444ba967be56)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(6,9eb000,146666,6fb3e8b7-501e-4b25-f791-787af6874f46)/EndEntire
/ACPI(a0341d0,0)/PCI(0,5)/SATA(0,ffff,0)/HD(7,b31800,4c8000,a9c6e5c0-20cd-4bb0-5895-154fa6daee2d)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,0)/EndEntire
/ACPI(a0341d0,0)/PCI(0,1)/ACPI(60441d0,1)/EndEntire
Total memory is 0x9f000
Total memory is 0x800000
Sysconf checksum failed. Using default values
WARNING:  No BIOS Info found
Sysconf checksum failed. Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no

success
Sysconf checksum failed. Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
 Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
 Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1

Then waiting........

after a while:

Code: Select all

[    2.826648] [1500418291] Error: Could not find mtd devices
init started at Tue Jul 18 22:51:35:512795101   unix time:1500418295
Installing klm_card_index
done
INIT: version 2.88 booting
Installing ata_piix module ... done.
Unsquashing rootfs ...
Installing isan procfs ... done.
Installing SSE module with card index 21099 ... done.
Creating SSE device node 248 ... done.
Loading I2C driver ... done.
Installing CCTRL driver for card_type 29 on a VM without NEED_GEM ... done.
11.44: Interrupt throttling disabled. No cctrl irq detected.
Loading IGB driver ... done.
Not Micron SSD...

Checking all filesystems.Warning: switch is starting up with default configuration

Installing SPROM driver ... IS_N9K done.
IS_SUP:; IS_SC:; IS_FC:; IS_LC:; IS_TOR:y done.
Installing pfmsvcs module with SPROM card index 21099 ... done.
Installing nvram module ... done.
Installing if_index module with port mode 6 ... done.
Installing RNI lcnd ... done
Installing LC netdev ... done
Installing psdev module ... done.
Installing veobc module ... done.
Inserting OBFL module ... done.
Making OBFL character devices
mounting plog for N9k!
Mounting OBFL pstore
Trying to mount cdrom...
Starting OpenBSD Secure Shell server: sshd ... done.
tune2fs 1.42.1 (17-Feb-2012)
Setting reserved blocks percentage to 0% (0 blocks)
flash_erase: error!: /dev/mtdrr
             error 19 (No such device)
flash_erase: error!: /dev/mtdoops
             error 19 (No such device)
Starting portmap daemon...
creating NFS state directory: done
starting 8 nfsd kernel threads: done
starting mountd: done
starting statd: done
Saving image for img-sync ...
Loading system software
Installing local RPMS
Patch Repository Setup completed successfully
Creating /dev/mcelog
Starting mcelog daemon
Overwriting dme stub lib
File /etc/shared/localtime does not exist.
INIT: Entering runlevel: 3
Running S93thirdparty-script...
Populating conf files for hybrid sysmgr ...
Starting hybrid sysmgr ...
inserting /isan/lib/modules/klm_cisco_nb.o ... done
2017 Jul 18 22:52:08  %$ VDC-1 %$ %USER-0-SYSTEM_MSG:  before access to bkout_cfg  - clis
2017 Jul 18 22:52:09  %$ VDC-1 %$  %USER-2-SYSTEM_MSG: <<%USBHSD-2-MOUNT>> logflash: online  - usbhsd
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-0-SYSTEM_MSG: [    2.826648] [1500418291] Error: Could not find mtd devices  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297632] Initializing NVRAM Block 1  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297640] Initializing NVRAM Block 2  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297656] Initializing NVRAM Block 3  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297725] Initializing NVRAM Block 4  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297870] Initializing NVRAM Block 5  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297891] Initializing NVRAM Block 6  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297958] Initializing NVRAM Block 7  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297963] Initializing NVRAM Block 8  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297991] Initializing NVRAM Block 9  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.297999] Initializing NVRAM Block 10  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298006] Initializing NVRAM Block 11  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298018] Initializing NVRAM Block 12  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298023] Initializing NVRAM Block 13  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298030] Initializing NVRAM Block 14  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298055] Initializing NVRAM Block 15  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298062] Initializing NVRAM Block 16  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298080] Initializing NVRAM Block 17  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298398] Initializing NVRAM Block 18  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298402] Initializing NVRAM Block 19  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298543] Initializing NVRAM Block 20  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298569] Initializing NVRAM Block 21  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298573] Initializing NVRAM Block 22  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.298719] Initializing NVRAM Block 23  - kernel
2017 Jul 18 22:52:10  %$ VDC-1 %$ Jul 18 22:52:10 %KERN-2-SYSTEM_MSG: [   13.371516] hwport mode=6 - kernel
2017 Jul 18 22:52:11  %$ VDC-1 %$ %VMAN-2-INSTALL_STATE: Installing virtual service 'guestshell+'
2017 Jul 18 22:52:14  %$ VDC-1 %$ netstack: Registration with cli server complete
2017 Jul 18 22:52:22  %$ VDC-1 %$ %USER-2-SYSTEM_MSG: ssnmgr_app_init called on ssnmgr up - aclmgr
2017 Jul 18 22:52:28  %$ VDC-1 %$ %COPP-2-COPP_NO_POLICY: Control-plane is unprotected.
2017 Jul 18 22:52:30  %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_GOLDEN: IOFPGA booted from Golden
2017 Jul 18 22:52:30  %$ VDC-1 %$ %CARDCLIENT-2-FPGA_BOOT_STATUS: Unable to retrieve MIFPGA boot status
2017 Jul 18 22:52:41  %$ VDC-1 %$ %VMAN-2-INSTALL_STATE: Install success virtual service 'guestshell+'; Activating
2017 Jul 18 22:52:41  %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Activating virtual service 'guestshell+'
2017 Jul 18 22:53:01  %$ VDC-1 %$ %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online
Starting Auto Provisioning ...
2017 Jul 18 22:53:05 switch %$ VDC-1 %$ %USER-1-SYSTEM_MSG: SWINIT failed. devid:241 inst:0  - t2usd
Done

Abort Auto Provisioning and continue with normal setup ?(yes/no)[n]: 2017 Jul 18 22:53:07 switch %$ VDC-1 %$ %POAP-2-POAP_INITED: [9S45WYK1X91-50:01:00:06:00:07] - POAP process initialized
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ %POAP-2-POAP_INFO: [9S45WYK1X91-50:01:00:06:00:07] - USB disk not detected
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ last message repeated 1 time
2017 Jul 18 22:53:23 switch %$ VDC-1 %$ %POAP-2-POAP_DHCP_DISCOVER_START: [9S45WYK1X91-50:01:00:06:00:07] - POAP DHCP Discover phase started
yes
Disabling POAP
2017 Jul 18 22:53:30 switch %$ VDC-1 %$ %VMAN-2-ACTIVATION_STATE: Successfully activated virtual service 'guestshell+'
2017 Jul 18 22:53:30 switch %$ VDC-1 %$ %VMAN-2-GUESTSHELL_ENABLED: The guest shell has been enabled. The command 'guestshell' may be used to access it, 'guestshell destroy' to remove it.


         ---- System Admin Account Setup ----


Do you want to enforce secure password standard (yes/no) [y]: n
E.



I waited for 40 minutes and the problem still appears. Error messages are looped


Very BAD :cry:

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by Uldis (UD) » Wed Jul 19, 2017 7:11 pm

did you check if your Antivurus has turned OFF virtualization check !?!
It can be poisonous reason..

But with such settings for EVE VM you will be luck if single NX9K...
:(
Try set CPU settings for EVE M like 4/1 but if you can then 8/1.

or find me in the slype: Uldisd.poisonfish
https://join.skype.com/PeQDmFcUBZYh

ba31
Posts: 1
Joined: Sat Jul 22, 2017 2:35 pm

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by ba31 » Sat Jul 22, 2017 5:06 pm

I also has same problem if I run on GNS3 it works fine but on EVE-NG it does not work.

Does anyone has suggestion to fix ?

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ERROR BOOT nxosv-final.7.0.3.I5.2.qcow2

Post by Uldis (UD) » Sat Jul 22, 2017 7:02 pm

No issues if to grab original csco qcow image and fllow this HowTo.
http://www.eve-ng.net/index.php/documen ... x9k-switch

Forked images which are OK on other emulation tool cannot be ok on EVE.
So please go for original advise.
The new version of EVE v70 has improvements for NX9K and please rename image inside pfolder to sataa.qcow2 instead of hda.qcow2.
Supports up to 50 interfaces and boots 3x faster now.

UD

Post Reply