I'm totally newbies on Eve-ng.
I added all Dynamips images accordingly with instruction -no error during installation- however after creating a lab and tried to run images I get message saying
The remote system refused the connection
from SecureCRT.
I noticed the image goes green to black after 3-5 sec.
I'm using
EVE-NG OVA (downloaded from mirror site), VMware workstation, RAM 6GB, Intel CPU (4 processor, 1 core/Processor) and HDD of 40GB.
Linux eve-ng 4.9.40-eve-ng-ukms-2+ #4 SMP Fri Sep 15 02:07:02 CEST 2017 x86_64 x86_64 x86_64 GNU/Linux
Please help!
Can't run Dynamips
Moderator: mike
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Can't run Dynamips
Dynamips images, if you got them from cisco, must be unzipped first.
and properly named with.image extention at the end.
so your image name for 3725 must be like this:
c3725-adventerprisek9-mz.124-15.T14.image
Supported are 1710, 3725 and 7200 images only
UD
and properly named with.image extention at the end.
so your image name for 3725 must be like this:
c3725-adventerprisek9-mz.124-15.T14.image
Supported are 1710, 3725 and 7200 images only
UD
-
- Posts: 3
- Joined: Sun Oct 01, 2017 3:29 pm
Re: Can't run Dynamips
Hi UD,
I did unzipped as command below;
unzip -p c3725-adventerprisek9-mz.124-15.bin > c3725-adventerprisek9-mz.124-15.image
but problem still persists. I followed all steps in How to guide.
Any other suggestions?
Many Thanks!
I did unzipped as command below;
unzip -p c3725-adventerprisek9-mz.124-15.bin > c3725-adventerprisek9-mz.124-15.image
but problem still persists. I followed all steps in How to guide.
Any other suggestions?
Many Thanks!
-
- Posts: 4
- Joined: Sun Oct 01, 2017 4:38 pm
Re: Can't run Dynamips
remembe all files.. *.image need to put in /opt/unetlab/addons/dynamips/
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Can't run Dynamips
I believe its silly mistake only
join in live skype, it is sortable 100%
UD
join in live skype, it is sortable 100%
UD
-
- Posts: 3
- Joined: Sun Oct 01, 2017 3:29 pm
Re: Can't run Dynamips
UD fixed the problem and yes it was didn't unzip properly.