Hi,
I configured a site-to-site VPN between vSRX (15.1X49-D80.4) and IOL (v15.4(2)T4) on EVE.
The type of VPN is Route-based (not policy-based).
Although IKE Phases 1&2 are both up, ping doesn't pass.
Any idea what's wrong?
Site-to-Site VPN between SRX and Cisco Router
Moderator: mike
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Site-to-Site VPN between SRX and Cisco Router
SIR please use attachments for post !!!
Such config load no one will read or investigate.
As well best of you would export lab from eve itself and upload here.
UD
Such config load no one will read or investigate.
As well best of you would export lab from eve itself and upload here.
UD
-
- Posts: 13
- Joined: Tue May 02, 2017 6:42 am
Re: Site-to-Site VPN between SRX and Cisco Router
Hi UD,
Sorry for pasting a lot of text here.
I found out I could not pass ping through an IPSec tunnel between two SRX's in the first place, so I'd like to solve that problem before I solve the Cisco-Juniper IPsec problem.
Please let me delete this thread (if I can, that is).
Sorry for pasting a lot of text here.
I found out I could not pass ping through an IPSec tunnel between two SRX's in the first place, so I'd like to solve that problem before I solve the Cisco-Juniper IPsec problem.
Please let me delete this thread (if I can, that is).