Hello how are you? I consult them, I do all the steps it says on the web to add the image, but when I add the router in the topology and turn it on, it never turns on. Any ideas what might be going on?
Just in case I tell you, I have the eve mounted on a vm through the hypervisor hyper-v in Windows 10.
I hope you can help me with your comments!
Thank you
Problems with the Nokia 7705 Router
Moderator: mike
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problems with the Nokia 7705 Router
Two reason about never come up turns blue:
1. Your EVE CPU has not enabled Inetl VT-X/EPT fucntion
This can be checked on eve cli:
Issue command:
kvm-ok
2. You simple did not prepare image right
1. Your EVE CPU has not enabled Inetl VT-X/EPT fucntion
This can be checked on eve cli:
Issue command:
kvm-ok
Code: Select all
root@eve-ng:~# kvm-ok
INFO: /dev/kvm exists
KVM acceleration can be used
root@eve-ng:~#
2. You simple did not prepare image right
-
- Posts: 2
- Joined: Wed Mar 25, 2020 4:32 am
Re: Problems with the Nokia 7705 Router
Hi how are you doing? I just see, when I put that command, it says the following:
Your CPU does not support the KVM extension.
KVM acceleration cannot be used.
That is, that with the motherboard or micro that I have I will not be able to make it work in eve-ng?
In GNS3 it works wonderfully.
Thank you for your comments!
Slds.
Your CPU does not support the KVM extension.
KVM acceleration cannot be used.
That is, that with the motherboard or micro that I have I will not be able to make it work in eve-ng?
In GNS3 it works wonderfully.
Thank you for your comments!
Slds.