Hello,
I'm totally stuck with the Eve NAT cloud.
I've added a Eve NAT cloud to my lab so I can access an Aruba ClearPass image with the web UI- see screenshot
It works pinging from the internal network out to the NAT cloud, but not in the opposite direction.
The NAT cloud is connected to a Cisco vIOS router image which I think is configured correctly for NAT.
I've been using "Bridged" Network Adaptor setting because I couldn't access the lab with the "NAT" setting - although this is probably the one I need to configure?
Any help would be brilliant.
Thanks
Paul
No web UI access to my images via NAT
Moderator: mike
-
- Posts: 2
- Joined: Sat Jan 27, 2024 10:00 am
No web UI access to my images via NAT
You do not have the required permissions to view the files attached to this post.
-
- Posts: 146
- Joined: Thu Mar 29, 2018 4:19 pm
Re: No web UI access to my images via NAT
you need to have a route from outside pointing to nat network
-
- Posts: 2
- Joined: Sat Jan 27, 2024 10:00 am
Re: No web UI access to my images via NAT
Ok thank you, can you tell me where I should do this?
Would this be the cisco IOS router?
Cheers
Paul
Would this be the cisco IOS router?
Cheers
Paul
-
- Posts: 146
- Joined: Thu Mar 29, 2018 4:19 pm
Re: No web UI access to my images via NAT
you will also need a static nat on vios