3640 image cannot be activated
Moderator: mike
-
- Posts: 1
- Joined: Thu Feb 22, 2024 8:32 am
3640 image cannot be activated
Is it possible to activate the 3640 image I have when I attempted to add a node but failed? Although I have some 3640 images, I noticed that the 3600 dynamips I created were inactive.
-
- Posts: 2
- Joined: Thu Dec 28, 2023 12:40 pm
Re: 3640 image cannot be activated
It's possible to activate your 3640 image after a failed node addition attempt, but it depends on the specific reason for the failure. Here's the deal:
If the failure was due to:
Image incompatibility: Then unfortunately, activating won't help. Verify the image compatibility with your Dynamips version and GNS3 configuration.
Incorrect configuration: Review your configuration closely, ensuring network interfaces, memory allocation, and other settings are correct for the 3640 image.
Dynamips bug: Check for known Dynamips issues with your specific image and Dynamips version. Community forums or bug trackers might offer solutions.
Activation methods:
GNS3: If using GNS3, right-click your 3640 node and select "Start". Ensure network connections are configured correctly.
Manual activation: Locate the Dynamips command prompt for your image and start it manually using the appropriate image file and configuration options.
Remember, activating won't magically fix incompatibility or configuration errors. Investigate the root cause of the failure before attempting activation.
If the failure was due to:
Image incompatibility: Then unfortunately, activating won't help. Verify the image compatibility with your Dynamips version and GNS3 configuration.
Incorrect configuration: Review your configuration closely, ensuring network interfaces, memory allocation, and other settings are correct for the 3640 image.
Dynamips bug: Check for known Dynamips issues with your specific image and Dynamips version. Community forums or bug trackers might offer solutions.
Activation methods:
GNS3: If using GNS3, right-click your 3640 node and select "Start". Ensure network connections are configured correctly.
Manual activation: Locate the Dynamips command prompt for your image and start it manually using the appropriate image file and configuration options.
Remember, activating won't magically fix incompatibility or configuration errors. Investigate the root cause of the failure before attempting activation.
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: 3640 image cannot be activated
too old image, simply end of life
-
- Posts: 2
- Joined: Wed Jan 17, 2024 9:05 am
Re: 3640 image cannot be activated
An activation error. Or maybe your images are too old.RalphTorp wrote: ↑Thu Feb 22, 2024 8:47 amIs it possible to activate the 3640 image I have when I attempted to add a node but failed? Although I have some 3640 images, I noticed that the 3600 dynamips I created wereslice master inactive.
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: 3640 image cannot be activated
dynamips 3640 is not supported by eve