After I follow this post http://www.eve-ng.net/index.php/documen ... -x-firefly, and then I start vSRX divice. It throws this:
Please help,Rebooting...
cpu_reset: Stopping other CPUs
Consoles: serial port
BIOS drive C: is disk0
BIOS 639kB/2096120kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.2
(builder@briath.juniper.net, Tue Jan 8 04:04:34 UTC 2013)
Loading /boot/defaults/loader.conf
/kernel text=0x894aa0 data=0x4d050+0x100b2c syms=[0x4+0x92cf0+0x4+0xd1487]
/boot/modules/libmbpool.ko text=0xd9c data=0x100
/boot/modules/if_em_vjx.ko text=0xb794 data=0x5ec+0x204 /
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
platform_early_bootinit: Early Boot Initialization
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2013, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1X44-D10.4 #0: 2013-01-08 05:52:29 UTC
builder@briath.juniper.net:/volume/build/junos/12.1/service/12.1X44-D10.4/obj-i386/junos/bsd/kernels/VSRX/kernel
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: QEMU Virtual CPU version 1.0 (2594.10-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x623 Stepping = 3
Features=0x783fbfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
Features2=0x80802001<SSE3,CX16,POPCNT,<b31>>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 2147475456 (2047 MB)
avail memory = 1488924672 (1419 MB)
MPTable: <BOCHSCPU 0.1 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1
Initializing VSRX platform properties ..
cpu0 on motherboard
cpu1 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: BIOS IRQ 10 for 0.5.INTA does not match link 0x60 irq 9
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc140-0xc14f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
em0: <Intel(R) PRO/1000 Network Connection - VJX stub Version - 3.2.18> port 0xc000-0xc03f mem 0xfeae0000-0xfeafffff irq 10 at device 2.0 on pci0
em1: <Intel(R) PRO/1000 Network Connection - VJX stub Version - 3.2.18> port 0xc040-0xc07f mem 0xfeb20000-0xfeb3ffff irq 11 at device 3.0 on pci0
em2: <Intel(R) PRO/1000 Network Connection - VJX stub Version - 3.2.18> port 0xc080-0xc0bf mem 0xfeb60000-0xfeb7ffff irq 11 at device 4.0 on pci0
em3: <Intel(R) PRO/1000 Network Connection - VJX stub Version - 3.2.18> port 0xc0c0-0xc0ff mem 0xfeba0000-0xfebbffff irq 9 at device 5.0 on pci0
pci0: <mass storage, SCSI> at device 6.0 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xed800-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: MDA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 131 ..
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:ad0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot> ?
List of GEOM managed disk devices:
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:ad0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
panic: Root mount failed, startup aborted.
cpuid = 0
db_log_stack_trace_cmd(c0d02ea0,0,c0c1f32c,f6a77c90,2) at db_log_stack_trace_cmd+0x36
panic(c0c1f32c,20) at panic+0x2dc
vfs_mountroot(0,0,0,0,0) at vfs_mountroot+0x15f
start_init(0,f6a77d38,0,0,0) at start_init+0x62
fork_exit(c0584cab,0,f6a77d38) at fork_exit+0x85
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xf6a77d70, ebp = 0 ---
###Entering boot mastership relinquish phase
KDB: enter: panic
[thread pid 1 tid 100006 ]
Stopped at kdb_enter+0x162: movl $0xc0c77125,0(%esp)
db>
