Page 1 of 1

about EVE-NG bridging to physical network

Posted: Sun Jul 01, 2018 9:23 am
by 请叫我接盘侠
this is quite a simple topology, i bridge the switch to my physical network which is 192.168.1.0/24
the thing is i can reach switch e0/1(192.168.1.10) from my physical PC, but not able to reach 10.1.1.0 network
i checked the ARP table on my PC, i found that the MAC address of 192.168.1.10 is the MAC of the computer where VMWare installed in instead of the real MAC of switch e0/1
is there any possibility that i can reach the network behind the direct connected network ?
thank you

Re: about EVE-NG bridging to physical network

Posted: Sun Jul 01, 2018 1:51 pm
by Uldis (UD)
Read EVE cookbook, section 10...

http://www.eve-ng.net/images/EVE-COOK-BOOK-1.0.pdf

UD

Re: about EVE-NG bridging to physical network

Posted: Sun Jul 01, 2018 1:53 pm
by Uldis (UD)
of course you will not be able to reach network behind 192.168.1.0...
:)
simple ccna task..no routes between 192.168.1.0 and 10.x.x.x

UD

Re: about EVE-NG bridging to physical network

Posted: Mon Jul 02, 2018 10:34 am
by 请叫我接盘侠
thanks UD, i will definitely go through the cookbook
a quick question here if you don't mind,
there is no routes problem here, both my physical PC and R2 point the gateway to the switch.
e0/1 belongs to vlan 10 and e0/0 belong to vlan 20, and i have interface vlan 10 and interface vlan 20 configured.
so on switch viewpoint, both 192.168.1.0 and 10.1.1.0 are direct connected.
the point is when i ping 10.1.1.0 from my physical PC on 192.168.1.0, the packet doesn't arrive switch e0/1 as the result of packet capture
my lab is all based on vmware workstation by the way

Re: about EVE-NG bridging to physical network

Posted: Tue Jul 03, 2018 1:06 am
by Uldis (UD)
turn off ip cef on switch

no ip cef

and your native PC knows about 192.168.1.0/24 network, but knows nothing how to reach 10.1.1.0

UD

Re: about EVE-NG bridging to physical network

Posted: Thu Jul 12, 2018 2:28 pm
by 请叫我接盘侠
hi UD, it has nothing to do with the routes, i configured the static route on my PC alright.
if you have interest, you can create the same lab in your environment, just like this: R1 —— R2 —— Cloud0 —— Physical PC
try to ping R1 from your physical PC(not a virtual machine but a physical PC), you will never make it

i tested the same lab in ESXi environment, it works perfectly fine, but it doesn't work out in VMware workstation

Re: about EVE-NG bridging to physical network

Posted: Thu Jul 12, 2018 3:30 pm
by Uldis (UD)
Read section 10 in our cook book. It is for EVE Pro, but most stuff regarding clouds is same in the EVE community
http://www.eve-ng.net/images/EVE-COOK-BOOK-1.0.pdf

Another thing it can be wifi adapter issue if you have bridged cloud with wifi interface
UD

Re: about EVE-NG bridging to physical network

Posted: Fri Jul 13, 2018 1:33 am
by 请叫我接盘侠
Uldis (UD) wrote:
Thu Jul 12, 2018 3:30 pm
Read section 10 in our cook book. It is for EVE Pro, but most stuff regarding clouds is same in the EVE community
http://www.eve-ng.net/images/EVE-COOK-BOOK-1.0.pdf

Another thing it can be wifi adapter issue if you have bridged cloud with wifi interface
UD
awesome, thats it, the wifi adapter is the cause!
i just test bridging cloud to the ethernet adapter and everthing is fine!

but whats the difference between bridging to wireless adapter and bridging to wired adapter?

thanks UD anyway

Re: about EVE-NG bridging to physical network

Posted: Fri Jul 13, 2018 7:13 am
by Uldis (UD)
Because not all wifi adapters (manufacturers) are supported by VM ware :)

Re: about EVE-NG bridging to physical network

Posted: Fri Jul 13, 2018 2:20 pm
by 请叫我接盘侠
that makes sense, perfect