Page 1 of 1

ISE 2.1 application always stay in initializing

Posted: Thu Jun 08, 2017 8:44 am
by xuyou
Hi

team

I have already install the ISE 2.1 with ISO,but i application not work。

I try stop and stat,and also reinstall、re-config it many times, it still has the problem. how to solve?

VM12
EVE 2.X
ISE 2.1
6700K
16GB DRAM
300GB HD for EVE

Re: ISE 2.1 application always stay in initializing

Posted: Thu Jun 08, 2017 7:34 pm
by Uldis (UD)
Simply CPU is weak.
Any ISE 2.x need min x4 CPU and 8G RAM.
Your CPU has only x4 threads

Re: ISE 2.1 application always stay in initializing

Posted: Fri Jun 09, 2017 1:25 am
by mcat84
xuyou wrote:
Thu Jun 08, 2017 8:44 am
Hi

team

I have already install the ISE 2.1 with ISO,but i application not work。

I try stop and stat,and also reinstall、re-config it many times, it still has the problem. how to solve?

VM12
EVE 2.X
ISE 2.1
6700K
16GB DRAM
300GB HD for EVE


since you are running vm12, just install your ise 2.1 inside vmware workstation will do .......
you can just do very simple testing with your ise 2.1 (ram not enough)


managed to run my ise 2.2 in i5 notebook (bare metal eve-ng).....allocate 10Gb and 4vCPU...........of course very slow during installation and database initialization.....(just watch a 30 minutes tv series while waiting for the basic ise services to be up).....

just test basic simulation like tacacs+ authentication, join ad domain and bla bla bla

Re: ISE 2.1 application always stay in initializing

Posted: Fri Jun 09, 2017 1:42 pm
by xuyou
maybe my disk speed is too slow