Can you explain me how to add more then 7 interfaces on xrv.
Regards
Can't add more than 7 interfaces on xrv
Moderator: mike
-
- Posts: 29
- Joined: Thu Mar 23, 2017 6:38 pm
Re: Can't add more than 7 interfaces on xrv
Not 100% sure, but this is most likely a limitation of the XRv image, not of EVE.
-
- Posts: 2
- Joined: Thu Mar 23, 2017 6:20 pm
Re: Can't add more than 7 interfaces on xrv
Router Interfaces
The Cisco IOS XRv Router interfaces behave the similar way as those on hardware-based Cisco routers. These interfaces function as follows:
The supported interfaces are Management Ethernet and Gigabit Ethernet interfaces.
Interface port numbering from 0 and up to a maximum of 128 interfaces (including Management Ethernet interface) are supported. The maximum interfaces count depends on the hypervisor used.
The first interface 0 is reserved for the Management Ethernet interface and subsequent interfaces become the Cisco IOS XRv Router data interfaces.
The Cisco IOS XRv Router interfaces map to virtual network interface card (vNIC) interfaces on the VM.
http://www.cisco.com/en/US/docs/ios_xr_ ... er_01.html
The Cisco IOS XRv Router interfaces behave the similar way as those on hardware-based Cisco routers. These interfaces function as follows:
The supported interfaces are Management Ethernet and Gigabit Ethernet interfaces.
Interface port numbering from 0 and up to a maximum of 128 interfaces (including Management Ethernet interface) are supported. The maximum interfaces count depends on the hypervisor used.
The first interface 0 is reserved for the Management Ethernet interface and subsequent interfaces become the Cisco IOS XRv Router data interfaces.
The Cisco IOS XRv Router interfaces map to virtual network interface card (vNIC) interfaces on the VM.
http://www.cisco.com/en/US/docs/ios_xr_ ... er_01.html