POC VXLAN Lab over MPLS by UD & Alain
Moderator: mike
-
- Posts: 10
- Joined: Tue Mar 28, 2017 2:03 am
Re: POC VXLAN Lab over MPLS by UD & Alain
Does it require 64GB of RAM? or 32GB will be enough? I will try it anyways, but thought I would ask in case anyone else has the same question.
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: POC VXLAN Lab over MPLS by UD & Alain
32 is enough but then start NXOS one by one ( wait boot process end before next one )
E.
E.
-
- Posts: 1
- Joined: Thu Mar 23, 2017 1:51 am
Re: POC VXLAN Lab over MPLS by UD & Alain
Wow Wow Wow awesome lab, thanks for sharing!!!!
-
- Posts: 1
- Joined: Tue Oct 24, 2017 5:39 pm
Re: POC VXLAN Lab over MPLS by UD & Alain
Thanks for this great lab. I'll definitely try this one out.
Hope I can share one also soon.
Hope I can share one also soon.
-
- Posts: 10
- Joined: Fri Sep 01, 2017 12:25 pm
Re: POC VXLAN Lab over MPLS by UD & Alain
Awesome lab and thanks for the share!
Keep in mind with vxlan that you need to increase the MTU on the transit devices. You will notice that in this lab if you try to ping with a 1500 byte packet it will fail.
Keep in mind with vxlan that you need to increase the MTU on the transit devices. You will notice that in this lab if you try to ping with a 1500 byte packet it will fail.
-
- Posts: 2
- Joined: Fri Nov 24, 2017 8:51 am
Re: POC VXLAN Lab over MPLS by UD & Alain
Really amazing!
-
- Posts: 1
- Joined: Tue Feb 06, 2018 4:59 pm
Re: POC VXLAN Lab over MPLS by UD & Alain
Great stuff. I would like to try vPC but Memory requirement For NX-OSv is
-
- Posts: 3
- Joined: Fri Feb 02, 2018 6:09 pm
Re: POC VXLAN Lab over MPLS by UD & Alain
Thank yu!!!
-
- Posts: 31
- Joined: Thu Jan 18, 2018 11:43 am
Re: POC VXLAN Lab over MPLS by UD & Alain
Hey UD,
may i ask for a help. I am using vios L2 15.2d image for SW1 but cannot form LACP as i am receiving this error on SW1:
Aug 25 21:43:01.507: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:01.507: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:07.439: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:08.372: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:09.381: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:11.007: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:23.814: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:24.818: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
Tried almost everything to fix it...without success...so LACP is still not formed an vpc also....dunno now if its a bug or something with eve. I have applied also commands duplex full on both sides, it doesnt help. On sw1, channel-group is mode on....
THX
may i ask for a help. I am using vios L2 15.2d image for SW1 but cannot form LACP as i am receiving this error on SW1:
Aug 25 21:43:01.507: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:01.507: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:07.439: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:08.372: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:09.381: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:11.007: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/0 (not full duplex), with NXOS-EE1(9DSRUJXG2SP)
Ethernet1/3 (full duplex).
*Aug 25 21:43:23.814: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
*Aug 25 21:43:24.818: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on Ethernet0/1 (not full duplex), with NXOS-EE2(97OIPCB8VJU)
Ethernet1/3 (full duplex).
Tried almost everything to fix it...without success...so LACP is still not formed an vpc also....dunno now if its a bug or something with eve. I have applied also commands duplex full on both sides, it doesnt help. On sw1, channel-group is mode on....
THX
-
- Posts: 5084
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: POC VXLAN Lab over MPLS by UD & Alain
First it is not vIOS but IOL..
Second this IOL is not capable run etherchannel
Thrid, this error is simple, all you need add on interfaces command duplex full.
Uldis
Second this IOL is not capable run etherchannel
Thrid, this error is simple, all you need add on interfaces command duplex full.
Uldis