MPLS LAB by Waisudin Farzam
Moderator: mike
-
- Posts: 3
- Joined: Wed Apr 12, 2017 1:14 pm
MPLS LAB by Waisudin Farzam
Greetings All,
please find the below MPLS lab i have created and share it to others too.
the lab is Pre-configured only with IP Addressing and interface description.
for implementing MPLS you guys need to find out the commands and work on it.
let me know if you guys had any questions or concerns about the lab.
Regards
Waisudin Farzam
please find the below MPLS lab i have created and share it to others too.
the lab is Pre-configured only with IP Addressing and interface description.
for implementing MPLS you guys need to find out the commands and work on it.
let me know if you guys had any questions or concerns about the lab.
Regards
Waisudin Farzam
You do not have the required permissions to view the files attached to this post.
-
- Posts: 135
- Joined: Wed Mar 15, 2017 3:30 pm
Re: MPLS LAB by Waisudin Farzam
great share!
Thanks, keep up!
Thanks, keep up!
-
- Posts: 4
- Joined: Sat Jul 08, 2017 5:42 am
Re: MPLS LAB by Waisudin Farzam
Somebody knows how to configure encapsulations PTP protocol over MPLS backbone?
-
- Posts: 3
- Joined: Sat May 13, 2017 9:01 am
Re: MPLS LAB by Waisudin Farzam
Thanks you so much for your sharing.
-
- Posts: 1
- Joined: Thu Jul 27, 2017 2:08 am
Re: MPLS LAB by Waisudin Farzam
Thanks for Sharing.
-
- Posts: 1
- Joined: Thu Sep 28, 2017 4:37 pm
Re: MPLS LAB by Waisudin Farzam
Nice LAB Thanks bro,
-
- Posts: 31
- Joined: Sun Sep 03, 2017 2:30 am
Re: MPLS LAB by Waisudin Farzam
I configured the lab so far for Customer Mazar but not sure if configured properly. I can ping between both of the customer sites but why do I see so many MPLS Labels when I do traceroute? I did a similar lab like this before where only one MPLS tag was displayed before AS hops. This is what i am seeing. I have not configured CE-1 and CE-2 for Kabul site yet. I am thinking on using OSPF between for that vrf.
CE-2-Mazar#ping 192.168.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
CE-2-Mazar#traceroute 192.168.0.2
Type escape sequence to abort.
Tracing the route to 192.168.0.2
VRF info: (vrf in name/id, vrf out name/id)
1 10.0.0.22 1 msec 1 msec 1 msec
2 10.0.0.26 [MPLS: Labels 903/309 Exp 0] 3 msec 4 msec 2 msec
3 10.0.0.33 [MPLS: Labels 801/309 Exp 0] 2 msec 6 msec 6 msec
4 10.0.0.29 [MPLS: Labels 700/309 Exp 0] 5 msec 5 msec 4 msec
5 10.0.0.10 [AS 15] [MPLS: Label 309 Exp 0] 4 msec 7 msec 7 msec
6 10.0.0.9 [AS 15] 10 msec 3 msec *
CE-2-Mazar#ping 192.168.0.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/2 ms
CE-2-Mazar#traceroute 192.168.0.2
Type escape sequence to abort.
Tracing the route to 192.168.0.2
VRF info: (vrf in name/id, vrf out name/id)
1 10.0.0.22 1 msec 1 msec 1 msec
2 10.0.0.26 [MPLS: Labels 903/309 Exp 0] 3 msec 4 msec 2 msec
3 10.0.0.33 [MPLS: Labels 801/309 Exp 0] 2 msec 6 msec 6 msec
4 10.0.0.29 [MPLS: Labels 700/309 Exp 0] 5 msec 5 msec 4 msec
5 10.0.0.10 [AS 15] [MPLS: Label 309 Exp 0] 4 msec 7 msec 7 msec
6 10.0.0.9 [AS 15] 10 msec 3 msec *
You do not have the required permissions to view the files attached to this post.
-
- Posts: 31
- Joined: Sun Sep 03, 2017 2:30 am
Re: MPLS LAB by Waisudin Farzam
I figured it out. I had my thought process all wrong (thrown off) because of the additional loops on customer edge routers and trying to follow along a video training where the provider used the same exact loopback IPs from two customer edge sites pointing to same PE router edge to drive the point that VRFs and MPLS provide multiple separate networks that can handle overlapping IPs.
-
- Posts: 3
- Joined: Thu Sep 07, 2017 6:52 pm
Re: MPLS LAB by Waisudin Farzam
Hello Waisudin
I have most of the lab figured out but having issues with BGP connection over the Multihops.
Can you share the BGP part of the configs on PE1 and PE2?
thanks
I have most of the lab figured out but having issues with BGP connection over the Multihops.
Can you share the BGP part of the configs on PE1 and PE2?
thanks
-
- Posts: 1
- Joined: Sun Jun 17, 2018 5:30 am
Re: MPLS LAB by Waisudin Farzam
Great Work!!
Thank you!!!
Thank you!!!