Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
How to install Cisco ISE 2.2 on EVE-NG?
Moderator: mike
-
- Posts: 9
- Joined: Sun May 21, 2017 10:24 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
-
- Posts: 36
- Joined: Wed Mar 22, 2017 6:40 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
[/quote]
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
[/quote]
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
[/quote]
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
-
- Posts: 9
- Joined: Sun May 21, 2017 10:24 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
[/quote]
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
[/quote]
I am using Lenovo ThinkPad T430 (Intel Core i5-3320M (2.60GHz 3MB)
-
- Posts: 9
- Joined: Sun May 21, 2017 10:24 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
[/quote]
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
[/quote]
Well, today I will try again. Thank You!
-
- Posts: 36
- Joined: Wed Mar 22, 2017 6:40 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
Lenovo ThinkPad T430 (Intel Core i5-3320M (2.60GHz 3MB)
For ISE
1. if your eve-ng is in vmware workstation - slow
2. ise in eve-ng (vmware workstation) - very slow
3. if you are not using SSD ---> forget about it....slow until zzzzzzzzzzzzzzzzz
For ISE
1. if your eve-ng is in vmware workstation - slow
2. ise in eve-ng (vmware workstation) - very slow
3. if you are not using SSD ---> forget about it....slow until zzzzzzzzzzzzzzzzz
-
- Posts: 20
- Joined: Fri Apr 07, 2017 2:47 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
[/quote]
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
[/quote]
hello
the ise release 2.1 2.2 will check the device UID,how would you passvie?
the process will halt if UID can't be check.
-
- Posts: 36
- Joined: Wed Mar 22, 2017 6:40 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
[/quote]
hello
the ise release 2.1 2.2 will check the device UID,how would you passvie?
the process will halt if UID can't be check.
[/quote]
My test platform is bare-metal EVE-NG + gnome gui (i7 notebook)
I am using ise-2.1.0.474.SPA.x86_64.iso........never ask for device UID during install.......(i assumed you are using EVE-NG in vmware workstation...,i don't have vmware worstation to test coz i already format my notebook to bare-metal EVE-NG + gnome gui)
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: How to install Cisco ISE 2.2 on EVE-NG?
and 2.1 and 2.2 runs great on eve
You do not have the required permissions to view the files attached to this post.
-
- Posts: 36
- Joined: Wed Mar 22, 2017 6:40 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
ok....
manage to download 2.1.0.470 and 2.2.0.470 from Cisco web site to test
(during bootup of iso, select 3. System Utilities --> 2. Virtual machine resource check)
Result -->
For 2.1.0.470.iso......it can detect the machine is a vm (therefore can proceed with installation without problem)
but
For 2.2.0.470.iso ..... it can't detect the machine is a vm ??????
it is so strange....i am using the same machine.........how come 2.1.0.470.iso is ok but 2.2.0.470 is not working ?
manage to download 2.1.0.470 and 2.2.0.470 from Cisco web site to test
(during bootup of iso, select 3. System Utilities --> 2. Virtual machine resource check)
Result -->
For 2.1.0.470.iso......it can detect the machine is a vm (therefore can proceed with installation without problem)
but
For 2.2.0.470.iso ..... it can't detect the machine is a vm ??????
it is so strange....i am using the same machine.........how come 2.1.0.470.iso is ok but 2.2.0.470 is not working ?
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
Cisco as just tuned the VM check to support VM but not Nested VM...
Anyway, look here for some clues:
https://www.linickx.com/hacking-cisco-ise-udi
Anyway, look here for some clues:
https://www.linickx.com/hacking-cisco-ise-udi