How to install Cisco ISE 2.2 on EVE-NG?

Moderator: mike

Kosmoskatten
Posts: 2
Joined: Mon Apr 03, 2017 12:19 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by Kosmoskatten » Fri Jun 02, 2017 7:52 pm

Just have to ask, why run ISE in eve-ng when it works really well as a VM outside?

I understand that it is nice to have it all in one view but besides that?

Regards

xuyou
Posts: 20
Joined: Fri Apr 07, 2017 2:47 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by xuyou » Sat Jun 03, 2017 12:30 am

I have the same questions!

crying……………………

I76700K_ASUSZ170 16GB DRAM vmworkstaion ----------------------------already test ISO 2.0 、2.2。。。。。ISO 2.1 is donwning,maybe the problem is vm

why
QQ截图20170603082814.png
You do not have the required permissions to view the files attached to this post.

xuyou
Posts: 20
Joined: Fri Apr 07, 2017 2:47 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by xuyou » Sat Jun 03, 2017 1:11 am

mcat84 wrote:
Mon May 29, 2017 3:11 am
xuyou wrote:
Mon May 29, 2017 1:32 am
mcat84 wrote:
Mon May 22, 2017 12:09 pm
Maybe I'm doing the wrong thing. You can tell how you installed? Step by Step.
i am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)

step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory

2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g

3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...


try to delete the virtioa.qcow2 and re-create.
hello

the ise release 2.1 2.2 will check the device UID,how would you passvie?

the process will halt if UID can't be check.
[/quote]

My test platform is bare-metal EVE-NG + gnome gui (i7 notebook)

I am using ise-2.1.0.474.SPA.x86_64.iso........never ask for device UID during install.......(i assumed you are using EVE-NG in vmware workstation...,i don't have vmware worstation to test coz i already format my notebook to bare-metal EVE-NG + gnome gui)
[/quote]


maybe the bare-metal is most important. the ISE do not be install in VM workstation

xuyou
Posts: 20
Joined: Fri Apr 07, 2017 2:47 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by xuyou » Sat Jun 03, 2017 1:38 am

I find EVE requirement

In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still works without Intel VT processors and can run installed within other hypervisors also But:

64 bits (x86_64) appliances won’t work.
Poor performances should be expected with 32 bits (i386) appliances.

maybe the ISE is x86_64?

ecze
Posts: 533
Joined: Wed Mar 15, 2017 1:54 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by ecze » Sat Jun 03, 2017 6:26 am

The problem is that ISE 2.2 installer try to detect UDI but is unable to find it in a L2 ( nested virtualization ) environment.

So , your problem can be solved by hack of ISO install , but you will probably have the same problem when ISE 2.2 is running after install....
ISE 2.2 will not let you change Filesystem content. Indeed, all binaries and system files are digitally signed and a library will take care that all files are original and not altered.
If you change any of system files, the ISE engine will never be launched....

E.

mcat84
Posts: 36
Joined: Wed Mar 22, 2017 6:40 am

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by mcat84 » Sat Jun 03, 2017 8:29 am

ok.....done some testing on ise installation on different compilations

version 2.1 --> all platform working
1. eve-ng bare metal
2. eve-ng under vmware workstation
3. pure kvm (using virt-manager) under ubuntu
4. windows 10 + vmware worskstation
5. ubuntu + vmware workstation

version 2.2 --> suspect the detection on kvm/qemu got problem
1, eve-ng bare metal --> not working
2. eve-ng under vmware workstation --> not working
3. pure kvm under ubuntu --> not working
4. windows 10 + vmware workstation --> working
5. ubuntu + vmware workstation --> working


notice that on version 2.1 iso, all the platform are working
but on version 2.2 iso, only install under vmware workstation is working (either in ubuntu or windows 10)



i even try to modify the kick start file (ks.cfg) and bypass some detection ...still fail to install after reaches certain point ......the only option is install 2.1 first then upgrade to 2.2 if u want to use ise 2.2 in eve-ng....


have to ask Udlis to help on this......

xuyou
Posts: 20
Joined: Fri Apr 07, 2017 2:47 pm

Re: How to install Cisco ISE 2.2 on EVE-NG?

Post by xuyou » Sun Jun 04, 2017 1:22 am

good job

i test 2.0 and 2.2, only the 2.1 ISO not test. I will download it next monday

Post Reply