Just have to ask, why run ISE in eve-ng when it works really well as a VM outside?
I understand that it is nice to have it all in one view but besides that?
Regards
How to install Cisco ISE 2.2 on EVE-NG?
Moderator: mike
-
- Posts: 2
- Joined: Mon Apr 03, 2017 12:19 pm
-
- Posts: 20
- Joined: Fri Apr 07, 2017 2:47 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
I have the same questions!
crying……………………
I76700K_ASUSZ170 16GB DRAM vmworkstaion ----------------------------already test ISO 2.0 、2.2。。。。。ISO 2.1 is donwning,maybe the problem is vm
why
crying……………………
I76700K_ASUSZ170 16GB DRAM vmworkstaion ----------------------------already test ISO 2.0 、2.2。。。。。ISO 2.1 is donwning,maybe the problem is vm
why
You do not have the required permissions to view the files attached to this post.
-
- Posts: 20
- Joined: Fri Apr 07, 2017 2:47 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
hellomcat84 wrote: ↑Mon May 29, 2017 3:11 ami am not sure what platform are you using....but my one is easy (i am using bare metal eve-ng ...i7 notebook)
step
1. rename the iso to cdrom.iso and copy to ise-2.1 directory
2. create a 200Gb virtioa.qcow2 in ise-2.1 directory
/opt/qemu/bin/qemu-img create -f qcow2 virtioa.qcow2 200g
3. fix permission
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions
4. go to gui and create lab... add ise (use vnc instead of telnet), network and etc. start the node...
try to delete the virtioa.qcow2 and re-create.
the ise release 2.1 2.2 will check the device UID,how would you passvie?
the process will halt if UID can't be check.
[/quote]
My test platform is bare-metal EVE-NG + gnome gui (i7 notebook)
I am using ise-2.1.0.474.SPA.x86_64.iso........never ask for device UID during install.......(i assumed you are using EVE-NG in vmware workstation...,i don't have vmware worstation to test coz i already format my notebook to bare-metal EVE-NG + gnome gui)
[/quote]
maybe the bare-metal is most important. the ISE do not be install in VM workstation
-
- Posts: 20
- Joined: Fri Apr 07, 2017 2:47 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
I find EVE requirement
In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still works without Intel VT processors and can run installed within other hypervisors also But:
64 bits (x86_64) appliances won’t work.
Poor performances should be expected with 32 bits (i386) appliances.
maybe the ISE is x86_64?
In other words the EVE-NG requirements are the same for nested ESXi virtualization or Cisco VIRL/CML. EVE-NG can still works without Intel VT processors and can run installed within other hypervisors also But:
64 bits (x86_64) appliances won’t work.
Poor performances should be expected with 32 bits (i386) appliances.
maybe the ISE is x86_64?
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
The problem is that ISE 2.2 installer try to detect UDI but is unable to find it in a L2 ( nested virtualization ) environment.
So , your problem can be solved by hack of ISO install , but you will probably have the same problem when ISE 2.2 is running after install....
ISE 2.2 will not let you change Filesystem content. Indeed, all binaries and system files are digitally signed and a library will take care that all files are original and not altered.
If you change any of system files, the ISE engine will never be launched....
E.
So , your problem can be solved by hack of ISO install , but you will probably have the same problem when ISE 2.2 is running after install....
ISE 2.2 will not let you change Filesystem content. Indeed, all binaries and system files are digitally signed and a library will take care that all files are original and not altered.
If you change any of system files, the ISE engine will never be launched....
E.
-
- Posts: 36
- Joined: Wed Mar 22, 2017 6:40 am
Re: How to install Cisco ISE 2.2 on EVE-NG?
ok.....done some testing on ise installation on different compilations
version 2.1 --> all platform working
1. eve-ng bare metal
2. eve-ng under vmware workstation
3. pure kvm (using virt-manager) under ubuntu
4. windows 10 + vmware worskstation
5. ubuntu + vmware workstation
version 2.2 --> suspect the detection on kvm/qemu got problem
1, eve-ng bare metal --> not working
2. eve-ng under vmware workstation --> not working
3. pure kvm under ubuntu --> not working
4. windows 10 + vmware workstation --> working
5. ubuntu + vmware workstation --> working
notice that on version 2.1 iso, all the platform are working
but on version 2.2 iso, only install under vmware workstation is working (either in ubuntu or windows 10)
i even try to modify the kick start file (ks.cfg) and bypass some detection ...still fail to install after reaches certain point ......the only option is install 2.1 first then upgrade to 2.2 if u want to use ise 2.2 in eve-ng....
have to ask Udlis to help on this......
version 2.1 --> all platform working
1. eve-ng bare metal
2. eve-ng under vmware workstation
3. pure kvm (using virt-manager) under ubuntu
4. windows 10 + vmware worskstation
5. ubuntu + vmware workstation
version 2.2 --> suspect the detection on kvm/qemu got problem
1, eve-ng bare metal --> not working
2. eve-ng under vmware workstation --> not working
3. pure kvm under ubuntu --> not working
4. windows 10 + vmware workstation --> working
5. ubuntu + vmware workstation --> working
notice that on version 2.1 iso, all the platform are working
but on version 2.2 iso, only install under vmware workstation is working (either in ubuntu or windows 10)
i even try to modify the kick start file (ks.cfg) and bypass some detection ...still fail to install after reaches certain point ......the only option is install 2.1 first then upgrade to 2.2 if u want to use ise 2.2 in eve-ng....
have to ask Udlis to help on this......
-
- Posts: 20
- Joined: Fri Apr 07, 2017 2:47 pm
Re: How to install Cisco ISE 2.2 on EVE-NG?
good job
i test 2.0 and 2.2, only the 2.1 ISO not test. I will download it next monday
i test 2.0 and 2.2, only the 2.1 ISO not test. I will download it next monday