ip routing ospf

Moderator: mike

Post Reply
e.w@llace.net
Posts: 4
Joined: Wed Jun 07, 2017 8:25 am

ip routing ospf

Post by e.w@llace.net » Thu Jun 08, 2017 5:49 pm

Hi,

I am using the following layer 3 image, however, I cannot enable ip routing ospf ? Please can somebody help me?

i86bi-linux-l3-adventerprisek9-15.5.2T.bin

I have tried several other layer 2 and layer 3 images and get the same result ?

thanks

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ip routing ospf

Post by Uldis (UD) » Thu Jun 08, 2017 7:03 pm

Works like charm
You do not have the required permissions to view the files attached to this post.

e.w@llace.net
Posts: 4
Joined: Wed Jun 07, 2017 8:25 am

Re: ip routing ospf

Post by e.w@llace.net » Thu Jun 08, 2017 7:11 pm

Hi,

Yes so it seems....?

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ip routing ospf

Post by Uldis (UD) » Thu Jun 08, 2017 7:53 pm

sorry?

e.w@llace.net
Posts: 4
Joined: Wed Jun 07, 2017 8:25 am

Re: ip routing ospf

Post by e.w@llace.net » Fri Jun 09, 2017 8:22 am

Hi,

I have reinstalled the version of ios and can test it from the cmd line, however, when you try to switch on ip routing ospf is fails, see output below. Any ideas ?
Router>en
Router#sh ver
Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.5(2)T, DEVELOPMENT TEST SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Thu 26-Mar-15 07:36 by prod_rel_team

ROM: Bootstrap program is Linux

Router uptime is 1 minute
System returned to ROM by reload at 0
System image file is "unix:/opt/unetlab/addons/iol/bin/i86bi-linux-l3-adventerprisek9-15.5"
Last reload reason: Unknown reason

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Linux Unix (Intel-x86) processor with 87588K bytes of memory.
Processor board ID 1
8 Ethernet interfaces
8 Serial interfaces
64K bytes of NVRAM.


Configuration register is 0x0

Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip routing ospf 10
^
% Invalid input detected at '^' marker.

Router(config)#

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: ip routing ospf

Post by Uldis (UD) » Fri Jun 09, 2017 9:01 am

hehehe

:)

Syntax mister:)

router ospf 10
network 10.1.1.0 0.0.0.255 area 0

dont mess ip routing command on switch with router protocol commands

e.w@llace.net
Posts: 4
Joined: Wed Jun 07, 2017 8:25 am

Re: ip routing ospf

Post by e.w@llace.net » Fri Jun 09, 2017 9:48 am

Hi Uldis,

Very sorry my BAD. Thank you

Post Reply