staging a new CSR IOS-XE image

Here you can ask EVE-NG team to add new images to the list to play in lab.

Do not ask questions like "where I can get image x or Y" in that forum

Moderator: mike

Post Reply
heidebock
Posts: 8
Joined: Tue Oct 30, 2018 1:17 pm

staging a new CSR IOS-XE image

Post by heidebock » Mon Jun 03, 2019 4:17 pm

is it possible to stage 2 versions of IOS-XE Everest in eve-ng?

We already have numerous CSR's deployed running csr1000vng-universalk9.16.05.02.Everest, but we need to test a feature in csr1000v-universalk9.16.06.06 (also Everest)... is it possible to use the instructions from your how-to:

https://www.eve-ng.net/documentation/ho ... li-routers

to just load this new version? Would be able to pick from the 'add node' dropdown? Would both images be able to run in parallel without issues?

Thanks!

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: staging a new CSR IOS-XE image

Post by Uldis (UD) » Tue Jun 04, 2019 8:05 pm

Use the same how just prepare new image..
under one csr can be numerous images..
https://www.eve-ng.net/documentation/ho ... li-routers

heidebock
Posts: 8
Joined: Tue Oct 30, 2018 1:17 pm

Re: staging a new CSR IOS-XE image

Post by heidebock » Thu Jun 06, 2019 2:22 pm

thank you for the answer... one follow-up question - is it possible to change between IOS versions if we have 2 versions available for 1 device? For example, switching between 16.06.05.Everest & 16.06.06.Everest? The GUI allows you to stop the node & edit the boot image, but the node seems to ignore this when booting & only boots to the image you added the node with...

thanks again!

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: staging a new CSR IOS-XE image

Post by Uldis (UD) » Thu Jun 06, 2019 2:30 pm

yes, but you mate did not read our how to..

Once node is started (CSR), EVE created tmp hdd for it... and image is running on it.
even you will change images for this node after stopping, it still will boot from saved tmp hdd. (previous image xe ios, because it is saved)
so how to:

run your CSR node, save cfg (wr) and EXPORT it !!!
then wipe node (this will clean(DELETE) your tmp previous hdd
set node boot from exported
change image(new XE IOS) from which you want start node
Start node, it will boot from exported cfg which you made from previous xe version.
DONE

And please pay some time to read our cookbook, this algorithm was explained very well.
Sectins 11.3.3 and forward
https://www.eve-ng.net/images/EVE-COOK-BOOK-1.10.pdf
and here
https://www.eve-ng.net/documentation/ho ... figuations

Uldis

Post Reply