[SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
Moderator: mike
-
- Posts: 3
- Joined: Thu Jun 29, 2017 6:51 pm
[SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
Hello,
Since I have manually update my eve-ng 2.0.3-60 to 2.0.3-68 as per this procedure on eve-ng site http://www.eve-ng.net/index.php/documen ... st-version and special note for 2.0.3-68,
I can no longer access to the WebUI.
That means I can see the login page, I can enter my credential but nothing occured by clicking on the "Sign In" Button.
It is like as "Sign in" button has been disabled
For information, my installation is
Esxi 6.0
Shuttle DH110SE
4 CPUs x Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
Memory : 15,89 Go
I made tests with Firefox, chrome, and IE.
I have ever cleared web browser cache, restarted eve-ng VM without effect.
Do you have an idea about what can be wrong since the upgrade and how I can fix this issue?
Thank you very much for your support
Many thanks
Since I have manually update my eve-ng 2.0.3-60 to 2.0.3-68 as per this procedure on eve-ng site http://www.eve-ng.net/index.php/documen ... st-version and special note for 2.0.3-68,
I can no longer access to the WebUI.
That means I can see the login page, I can enter my credential but nothing occured by clicking on the "Sign In" Button.
It is like as "Sign in" button has been disabled
For information, my installation is
Esxi 6.0
Shuttle DH110SE
4 CPUs x Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
Memory : 15,89 Go
I made tests with Firefox, chrome, and IE.
I have ever cleared web browser cache, restarted eve-ng VM without effect.
Do you have an idea about what can be wrong since the upgrade and how I can fix this issue?
Thank you very much for your support
Many thanks
Last edited by good2go on Fri Jun 30, 2017 5:36 pm, edited 1 time in total.
-
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Re: Problem to access the WEBUI after updating to 2.0.3-68
it should not have effected, are you sure is your upgrade done with out any errors ?good2go wrote: ↑Thu Jun 29, 2017 7:03 pmHello,
Since I have manually update my eve-ng 2.0.3-60 to 2.0.3-68 as per this procedure on eve-ng site http://www.eve-ng.net/index.php/documen ... st-version and special note for 2.0.3-68,
I can no longer access to the WebUI.
That means I can see the login page, I can enter my credential but nothing occured by clicking on the "Sign In" Button.
It is like as "Sign in" button has been disabled
For information, my installation is
Esxi 6.0
Shuttle DH110SE
4 CPUs x Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz
Memory : 15,89 Go
I made tests with Firefox, chrome, and IE.
I have ever cleared web browser cache, restarted eve-ng VM without effect.
Do you have an idea about what can be wrong since the upgrade and how I can fix this issue?
Thank you very much for your support
Many thanks
attached screenshot see what exactly the issue
R!
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Problem to access the WEBUI after updating to 2.0.3-68
please show cli output:
df -h
df -h
-
- Posts: 3
- Joined: Thu Jun 29, 2017 6:51 pm
Re: Problem to access the WEBUI after updating to 2.0.3-68
Hello,
I confirm the upgrade take place without any error.
After the upgrade I had the chance to test the new version. However, I get an issue by starting an image I get used to run so I deciced to restart the VM. After the reboot, it was impossible to get accces to the application through the WEB GUI.
Below is the result of df -h command.
root@eve-ng:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 799M 46M 753M 6% /run
/dev/mapper/eve--ng--vg-root 36G 35G 0 100% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 472M 112M 336M 25% /boot
Do you think this issue is due to no space on /dev/mapper/eve--ng--vg-root ?
I am going to try to extend my linux partition or delete unused files and I will tell you if this fix this issue.
In any case, thank you for your support
I confirm the upgrade take place without any error.
After the upgrade I had the chance to test the new version. However, I get an issue by starting an image I get used to run so I deciced to restart the VM. After the reboot, it was impossible to get accces to the application through the WEB GUI.
Below is the result of df -h command.
root@eve-ng:~# df -h
Filesystem Size Used Avail Use% Mounted on
udev 3.9G 0 3.9G 0% /dev
tmpfs 799M 46M 753M 6% /run
/dev/mapper/eve--ng--vg-root 36G 35G 0 100% /
tmpfs 3.9G 0 3.9G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup
/dev/sda1 472M 112M 336M 25% /boot
Do you think this issue is due to no space on /dev/mapper/eve--ng--vg-root ?
I am going to try to extend my linux partition or delete unused files and I will tell you if this fix this issue.
In any case, thank you for your support
-
- Posts: 3
- Joined: Thu Jun 29, 2017 6:51 pm
Re: Problem to access the WEBUI after updating to 2.0.3-68
Hello,
Thank you very much.
By deleting some files to make space, I can access to the WEB GUI right now.
Thank you very much
SOLVED
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: [SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
Correct solution would be add another hdd, the second one in EVE:)
-
- Posts: 4
- Joined: Tue Jul 18, 2017 9:34 pm
Re: [SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
Uldis could you please describe how to extend space on that mapper?Uldis (UD) wrote: ↑Sat Jul 01, 2017 8:00 am
Correct solution would be add another hdd, the second one in EVE:)
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: [SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
http://eve-ng.net/index.php/documentati ... -on-eve-vm
Please take time to look in our website with a lot of howto's to avoid such question....
E.
Please take time to look in our website with a lot of howto's to avoid such question....
E.
-
- Posts: 4
- Joined: Tue Jul 18, 2017 9:34 pm
Re: [SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
ecze
Thanks for that video. In my instance when I deployed .ova file before start of the EVE I did increase space on the drive to 80GB from 30 standart that was already in there.
Is there any way to apply the rest of the space since or decrease?
my dh -f shows this: /dev/mapper/eve--ng--vg-root 24G 23G 0 100% /
or just adding second disk will fix it on its own?
https://ibb.co/bvsGzk
https://ibb.co/h8idC5
Thanks for that video. In my instance when I deployed .ova file before start of the EVE I did increase space on the drive to 80GB from 30 standart that was already in there.
Is there any way to apply the rest of the space since or decrease?
my dh -f shows this: /dev/mapper/eve--ng--vg-root 24G 23G 0 100% /
or just adding second disk will fix it on its own?
https://ibb.co/bvsGzk
https://ibb.co/h8idC5
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: [SOLVED]Problem to access the WEBUI after updating to 2.0.3-68
yyou did wrong my dear...
you had to add another second HDD.
Video was given for it
http://www.eve-ng.net/index.php/documen ... -on-eve-vm
you had to add another second HDD.
Video was given for it
http://www.eve-ng.net/index.php/documen ... -on-eve-vm