Enjoy another my masterpiece.
Complex Security Perimeter Lab.
Tasks you will find on lab topology
Images used for lab:
Windows 7 host for management and VPN
IOL L2 IRON 15.2
IOL L3 15.4.2T
ASA 8.4.2
UD
Complex Security Perimeter LAB by UD
Moderator: mike
-
- Posts: 5148
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Complex Security Perimeter LAB by UD
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2
- Joined: Wed Aug 16, 2017 3:05 am
Re: Complex Security Perimeter LAB by UD
Thanks Uldis,
I am pretty new for this kind of tools but managed to install due to your team's good documents.
I imported this lab and have some issues.
I am using ASAv9.5.2 image though your lab using 8.4.2, VPN/SEC Zone FW is working but I don't know why Perimeter FW is not able to start, please let me know the reason... resource is enough.
And another one is I tried another lab, but failed to start SW but here I have no issue on SW as all booted already.
Can you let me know why it showed different result ?
Thanks in advance.
Jason
HI All,
I found that the image of Perimeter ASA is not ASAv, and I don't have this image,so I understood It is not started.
I unlock this lab and tried to edit this this Perimeter ASA to ASAv, just like the other ASAv is working, but I cannot change template, or image, or Icon to ASAv.
Please help me on this issue asap, how to change any particular node.
Thanks in advance.
Jason
I am pretty new for this kind of tools but managed to install due to your team's good documents.
I imported this lab and have some issues.
I am using ASAv9.5.2 image though your lab using 8.4.2, VPN/SEC Zone FW is working but I don't know why Perimeter FW is not able to start, please let me know the reason... resource is enough.
And another one is I tried another lab, but failed to start SW but here I have no issue on SW as all booted already.
Can you let me know why it showed different result ?
Thanks in advance.
Jason
HI All,
I found that the image of Perimeter ASA is not ASAv, and I don't have this image,so I understood It is not started.
I unlock this lab and tried to edit this this Perimeter ASA to ASAv, just like the other ASAv is working, but I cannot change template, or image, or Icon to ASAv.
Please help me on this issue asap, how to change any particular node.
Thanks in advance.
Jason
You do not have the required permissions to view the files attached to this post.
-
- Posts: 5148
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Complex Security Perimeter LAB by UD
you need ported asa image 8.4.2 or 9.1.5, because only these supports context active/active scenario
As well win7 host image is necessary
As well win7 host image is necessary
-
- Posts: 2
- Joined: Wed Aug 16, 2017 3:05 am
Re: Complex Security Perimeter LAB by UD
Thanks UD, Appreciated your reply.
I managed to work in this lab.
Can I have the final configuration of all the nodes ?
I thought there is only a few configuration on this lab, not the final configuration.
I will try to configure by myself, however I may not sure my configuration is correct or not.
So I seek your help of getting the final configuration of this lab and Remote Access Lab configuration as well.
My email-id is inwang@naver.com, please share to me.
thanks in advance.
I managed to work in this lab.
Can I have the final configuration of all the nodes ?
I thought there is only a few configuration on this lab, not the final configuration.
I will try to configure by myself, however I may not sure my configuration is correct or not.
So I seek your help of getting the final configuration of this lab and Remote Access Lab configuration as well.
My email-id is inwang@naver.com, please share to me.
thanks in advance.
-
- Posts: 5148
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Complex Security Perimeter LAB by UD
this lab was created from real case, and all configs contains real IP and passwords etc, that why no cfg provided and will not be.
Figure your self, like you have task to do it
Figure your self, like you have task to do it