Moderator: mike
-
ramindia
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Post
by ramindia » Mon Feb 26, 2018 11:21 pm
WaqAze wrote: ↑Mon Feb 19, 2018 1:47 am
I tried to configure FabricPath on N9k and N7k titanium but didnt got the desired results.Can anyone help me out here?
you can only do certain features to test with virtuals
R!
-
questcd
- Posts: 1
- Joined: Mon Jun 04, 2018 3:55 am
Post
by questcd » Mon Jun 04, 2018 4:05 am
I did not see feature-set fabricpath. Anyone tried OTV with titanium?
-
Uldis (UD)
- Posts: 5140
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
-
Contact:
Post
by Uldis (UD) » Mon Jun 04, 2018 5:36 pm
Titanium is worst nxos replica image.
it is even not real nxos image but like packet tracer software
-
oksid
- Posts: 1
- Joined: Tue Jul 10, 2018 7:24 am
Post
by oksid » Tue Jul 10, 2018 7:27 am
Thank you
-
anonymous1234
- Posts: 4
- Joined: Mon Sep 25, 2017 10:06 pm
Post
by anonymous1234 » Mon Sep 17, 2018 3:39 pm
This topology is filled with so many Nexus. Booting them will only cause high CPU,Memory utilization.
May I know the real intention/tasks behind this lab?
It would be good if we could use IOL/IOSv2/IOSL3 with 2 Nexus or 4 Nexus nodes for testing VPC, Keepalives, and other lab purpose.
Depends on the tasks that is behind this topology. Can you share please.
-
sanjeevlsg
- Posts: 13
- Joined: Thu Sep 20, 2018 5:58 am
Post
by sanjeevlsg » Fri Oct 19, 2018 9:27 am
Do you have startup config if so please share ,as current config all empty I can power on the lab. Thanks
-
sanjeevlsg
- Posts: 13
- Joined: Thu Sep 20, 2018 5:58 am
Post
by sanjeevlsg » Mon Oct 29, 2018 6:56 am
Can we have the startup config for this lab. Thanks
-
rommon
- Posts: 1
- Joined: Fri Aug 24, 2018 10:47 am
Post
by rommon » Fri Dec 28, 2018 1:19 pm
thanks
-
sanjeevlsg
- Posts: 13
- Joined: Thu Sep 20, 2018 5:58 am
Post
by sanjeevlsg » Mon Jan 07, 2019 4:27 am
Hello
can you help to get the unl with startup configurations. Thanks
-
dinoose
- Posts: 2
- Joined: Sun Jun 07, 2020 2:21 am
Post
by dinoose » Sun Jun 07, 2020 2:25 am
komalthecoolk wrote: ↑Sun Sep 03, 2017 3:27 pm
I'm still doing the Flood and Learn VXLAN labs and it doesn't work when using Nexus9000v. I've spent the whole day following INE videos and then referring to Cisco documents. There are a ton of "this is not possible" points for nexus 9K when it comes to VXLAN. May be I should give up and move to BGP EVPN.
What kind of issues are you facing on the VXLAN?. The VTEPs should come up without any issues. I had few bumps on the road while trying to do head end replication with the n9kv, otherwise the VTEPs came up once the IGP was converged.