Juniper vMX fpc port issue

Moderator: mike

Post Reply
penguin02007
Posts: 3
Joined: Sat Dec 05, 2020 1:20 am

Juniper vMX fpc port issue

Post by penguin02007 » Sat Dec 19, 2020 6:27 am

This is running on 18.2R1.9 lite mode.

The last port on any FPC is always down. Tried set chassic ports but no luck. Have anyone see that?
set chassis fpc 0 number-of-ports 12
set chassis fpc 1 number-of-ports 12
# run show interfaces terse xe-0/0/9
Interface Admin Link Proto Local Remote
xe-0/0/9 up down
xe-0/0/9.0 up down inet 10.0.0.1/31
mpls
multiservice

# run show interfaces terse ge-1/0/9
Interface Admin Link Proto Local Remote
ge-1/0/9 up down

penguin02007
Posts: 3
Joined: Sat Dec 05, 2020 1:20 am

Re: Juniper vMX fpc port issue

Post by penguin02007 » Wed Dec 23, 2020 4:32 am

Changing the number of ports on the VFP image fixed the issue.

Post Reply