Support and News Forum

Posted: **Tue Dec 22, 2020 10:58 am**

Hello, I'm new to the tool, so forgive me if that has already been answered somewhere. Im not new to Junos however.

I'm using Junos 19.2R1.8. Image boots just fine, console works, all configurations seem to be working.

However, basic problem is , in the topology it lets me attach interfaces, but then those are missing in the Junos cli itself. This makes device unusable pretty much.
root# run show interfaces terse | match ge
***blank****

Any ideas , please?

Thanks

Posted: **Tue Dec 22, 2020 12:51 pm**

yes, SRX 3.0 need properly create
You have to use proper template
https://www.eve-ng.net/index.php/docume ... and-later/
and follow if your eve is updated to latest

Posted: **Sun May 30, 2021 7:22 am**

Sorry to bump old thread, but I also see GE-* interfaces missing in Junos: 20.1R1.11 on vSRX. I have used URL provided, but...

root> show interfaces terse
Interface Admin Link Proto Local Remote
dsc up up
em0 up up
em0.0 up up inet 129.16.0.1/2
143.16.0.1/2
tnp 0x1100001
em1 up up
em1.32768 up up inet 192.168.1.2/24
em2 up up
fxp0 up up
gre up up
ipip up up
lo0 up up
lo0.16384 up up inet 127.0.0.1 --> 0/0
lo0.16385 up up inet 10.0.0.1 --> 0/0
10.0.0.16 --> 0/0
128.0.0.1 --> 0/0
128.0.0.4 --> 0/0
128.0.1.16 --> 0/0
lsi up up
mtun up up
pimd up up
pime up up
tap up up

Posted: **Thu Apr 21, 2022 2:40 am**

make sure you are using the default amount of cpu and ram (2x CPU and 4096 RAM). That fixed the issue for me.

Support and News Forum

vSRX interfaces missing

vSRX interfaces missing

Re: vSRX interfaces missing

Re: vSRX interfaces missing

Re: vSRX interfaces missing