Hi Friends,
I have configured the two cisco router R0 and R1. I try to ping 8.8.8.8 source e0/1 using router1. It's not pinging. Anyone please help me to solve a problem
I am till facing problem that r1 e0/1 i cannot able to ping 8.8.8.8
My Router 0 configuration
#en
#conf terminal
#interface ethernet 0/0
#ip address 192.168.168.211 255.255.255.0
#no shutdown
#exit
#interface ethernet 0/1
#ip address 10.10.10.100 255.255.255.0
#no shutdown
#exit
#ip route 30.10.10.0 255.255.255.0 10.10.10.101
#ip route 0.0.0.0 0.0.0.0 192.168.168.168
#exit
My Router 1 configuration
#en
#conf terminal
#interface ethernet 0/0
#ip address 10.10.10.101 255.255.255.0
#no shutdown
#exit
#interface ethernet 0/1
#ip address 30.10.10.100 255.255.255.0
#no shutdown
#exit
#ip route 192.168.168.0 255.255.255.0 10.10.10.100
#ip route 0.0.0.0 0.0.0.0 10.10.10.100
#exit
I try to ping a R2 router e0/1 using a R1 router
Moderator: mike
-
- Posts: 1
- Joined: Thu Sep 29, 2022 5:09 pm
I try to ping a R2 router e0/1 using a R1 router
You do not have the required permissions to view the files attached to this post.
Last edited by mohamed.rafeek on Sat Nov 12, 2022 5:39 pm, edited 3 times in total.
-
- Posts: 5150
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: I try to ping a R2 router e0/1 using a R1 router
You simply did not configure routing on your routers.
I had explained it to you in the EVE chat.
I had explained it to you in the EVE chat.