XRv9000 does not accept no standard user or password

Moderator: mike

Post Reply
renato
Posts: 1
Joined: Sat Feb 27, 2021 11:03 pm

XRv9000 does not accept no standard user or password

Post by renato » Sat Feb 27, 2021 11:30 pm

If anybody would help to solve this issue.
I have installed XRv 9000 and seems fine until the user login.
None of the default users as root, cisco, admin, lab are accepted.
I've tried many ways to login via serial but did not work either.

=================================================
=================================================
mcelog start/running, process 3452
diskmon start/running, process 3477
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Hardware profile: vrr
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Host has 15.51GB RAM / 4 vCPUs
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Management plane: 1024MB RAM
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): XR control plane: 7168MB RAM
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): XR packet memory: 128MB RAM
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Centralized LC: 7168MB RAM
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Data plane core assignment: 2-3
Sat Feb 27 23:08:28 UTC 2021 (/proc/self/fd/9): Control plane core assignment: 0-1

################################################################################
# #
# Welcome to the Cisco IOS XRv9k platform #
# #
# The primary Cisco IOS XR console will NOT start in this terminal. #
# Please use the VGA port for configuring Cisco IOS XR. #
# #
# Copyright (c) 2014-2017 by Cisco Systems, Inc. #
# #
################################################################################

Cisco IOS XR console will start on the VGA console
Cisco IOS XR aux console will start on the 1st serial port
Cisco Calvados console will start on the 2nd serial port
Cisco Calvados aux will start on the 3rd serial port

User Access Verification:
Username:
===============================================================================
The possible way to access informed below, does not work too.


-serial telnet:127.0.1.10:10621,nowait,server \
-serial telnet:127.0.1.10:14713,nowait,server \
-serial telnet:127.0.1.10:18090,nowait,server \
-serial telnet:127.0.1.10:17181,nowait,server \
===============================================================================
https://content.cisco.com/chapter.sjs?u ... 1.html.xml

Renato
Many thanks
Regards

Uldis (UD)
Posts: 5148
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: XRv9000 does not accept no standard user or password

Post by Uldis (UD) » Sun Feb 28, 2021 10:49 am

Your node is not booted fully, need wait
and stadard is admin/admin

and do not post same thing twice

Post Reply