CCNP ROUTE - OCG Labs

Moderator: mike

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

CCNP ROUTE - OCG Labs

Post by azaghul33 » Sun Apr 30, 2017 7:37 pm

Finally worked my way through the ROUTE OCG, and here are 95% of the labs for EVE/UNL, and probably 95% accurate...
As all we get in the OCG is the topology, some config fragments and some show command output, I've reverse engineered what I can and made some assumptions for the rest...and done some tidy up...Enjoy!
BGP-Lab.png
Edit: added some missing Labs from chapter 4
You do not have the required permissions to view the files attached to this post.
Last edited by azaghul33 on Sun May 14, 2017 6:46 am, edited 3 times in total.

iovanotti21
Posts: 1
Joined: Fri May 05, 2017 1:44 am

Re: CCNP ROUTE - OCG Labs

Post by iovanotti21 » Fri May 05, 2017 1:46 am

Thank you so much for this!!! Perfect for my studies!!! :D :D :D

Lastic
Posts: 3
Joined: Sat May 06, 2017 1:11 pm

Re: CCNP ROUTE - OCG Labs

Post by Lastic » Sat May 06, 2017 3:26 pm

Thanks a lot, just a quick question since I'm not used yet to eve-ng/unetlab , used to run everything in cli with IOU on an Ubuntu install.

Is it correct there are no startup-configs in the routers ?

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Re: CCNP ROUTE - OCG Labs

Post by azaghul33 » Sat May 06, 2017 7:36 pm

All the configs should have been exported and ready to run. If any issues, let me know which lab(s).

Lastic
Posts: 3
Joined: Sat May 06, 2017 1:11 pm

Re: CCNP ROUTE - OCG Labs

Post by Lastic » Sun May 07, 2017 1:03 pm

Well, all the labs ;) so it looks as an issue on my end ,could it be that I lose the startup-configs because either I'm using a higher eve-ng version
EVE-NG version: 2.0.3-60 or a different IOL than you when you created the lab ?

I just do import , select the ZIP file , then start one of the labs .

kofeee
Posts: 2
Joined: Sun May 07, 2017 1:26 pm

Re: CCNP ROUTE - OCG Labs

Post by kofeee » Sun May 07, 2017 10:17 pm

Thank you, Sir!
Can you confirm that all devices in labs (switches and routers) use the same L3 IOL image?

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Re: CCNP ROUTE - OCG Labs

Post by azaghul33 » Mon May 08, 2017 12:49 am

Lastic wrote:
Sun May 07, 2017 1:03 pm
Well, all the labs ;) so it looks as an issue on my end ,could it be that I lose the startup-configs because either I'm using a higher eve-ng version
EVE-NG version: 2.0.3-60 or a different IOL than you when you created the lab ?
I just do import , select the ZIP file , then start one of the labs .
Did an export all from EVEv60 at home, and imported all to UNLv14 at work (cleared all my tmp folder as well)...have done a random sample test, all mine boot from the exported config

azaghul33
Posts: 29
Joined: Thu Mar 23, 2017 6:38 pm

Re: CCNP ROUTE - OCG Labs

Post by azaghul33 » Mon May 08, 2017 12:55 am

kofeee wrote:
Sun May 07, 2017 10:17 pm
Can you confirm that all devices in labs (switches and routers) use the same L3 IOL image?
Using IOL versions:
L3-adventerprisek9-m-15.4-2T4.bin (for most Labs)
L3-adventerprisek9-m-12.4.bin (for the BGP labs)
L2-adventerprisek9-m-15.2-20150703.bin (can't recall if there are any L2 switches in there, but if there are...)

But if you load the lab, and click "nodes" it will list the IOL versions used

kofeee
Posts: 2
Joined: Sun May 07, 2017 1:26 pm

Re: CCNP ROUTE - OCG Labs

Post by kofeee » Mon May 08, 2017 2:56 pm

azaghul33 wrote:
Mon May 08, 2017 12:55 am
kofeee wrote:
Sun May 07, 2017 10:17 pm
Can you confirm that all devices in labs (switches and routers) use the same L3 IOL image?
Using IOL versions:
L3-adventerprisek9-m-15.4-2T4.bin (for most Labs)
L3-adventerprisek9-m-12.4.bin (for the BGP labs)
L2-adventerprisek9-m-15.2-20150703.bin (can't recall if there are any L2 switches in there, but if there are...)

But if you load the lab, and click "nodes" it will list the IOL versions used
Got it. Huge thank you again!

HeatonZ
Posts: 2
Joined: Mon Mar 27, 2017 4:08 am

Re: CCNP ROUTE - OCG Labs

Post by HeatonZ » Wed May 10, 2017 6:22 am

Thank you for sharing the Lab.

Post Reply