AMD RYZEN 5 - BARE METAL - Issue

Moderator: mike

Post Reply
ping2naveen
Posts: 10
Joined: Tue Mar 21, 2017 1:03 pm

AMD RYZEN 5 - BARE METAL - Issue

Post by ping2naveen » Sat Jun 17, 2017 7:40 pm

Hi,

I installed the BARE METAL on the below mentioned configuration with my machine.

CPU AMD RYZEN 5, 1600X
MB Gigabyte AB350 GAMING 3
32 GB DDR4 2400

Installation is successful and i am able to access the devices also with no issue. but suddenly around after 10-15 Minutes the lab is not reachable and even i am not able to ping the IP addresses of machine.

It got hanged and even the EVE-NG console is also not working. no Ping , no ssh, no http.

but when i restarts the machine it starts working and all labs are working fine and again after some time it got hanged.

tried to check the logs but no logs found. Let me know if any other logs are required.

root@eve-ng:/opt/unetlab/data/Logs# cat error.txt
root@eve-ng:/opt/unetlab/data/Logs#
root@eve-ng:/opt/unetlab/data/Logs# cat api.txt

Can someone help me to understand the issue. Please help me on this.

Regards,
NAMAL

mcat84
Posts: 36
Joined: Wed Mar 22, 2017 6:40 am

Re: AMD RYZEN 5 - BARE METAL - Issue

Post by mcat84 » Mon Jun 19, 2017 4:56 am


ping2naveen
Posts: 10
Joined: Tue Mar 21, 2017 1:03 pm

Re: AMD RYZEN 5 - BARE METAL - Issue

Post by ping2naveen » Mon Jun 19, 2017 1:49 pm

Thanks for providing the link. I will check it today and will see if it helps.

NAMAL

ping2naveen
Posts: 10
Joined: Tue Mar 21, 2017 1:03 pm

Re: AMD RYZEN 5 - BARE METAL - Issue

Post by ping2naveen » Mon Jun 19, 2017 7:17 pm

Hi Mate,

I tried following using the link but not succeeded. Any other option available.

mariusgeonea
Posts: 4
Joined: Tue Sep 19, 2017 12:48 pm

Re: AMD RYZEN 5 - BARE METAL - Issue

Post by mariusgeonea » Tue Sep 19, 2017 12:58 pm

after you fixed the issue, are you able to run images, and what images are you able to run from cisco for example?

Egorover
Posts: 4
Joined: Fri Apr 06, 2018 11:33 am

AMD RYZEN 5 BARE METAL Issue

Post by Egorover » Wed Apr 11, 2018 1:56 am

I apologise, but, in my opinion, you commit an error. Write to me in PM.

Post Reply