Viptela SD-WAN with cEdges by UD

[Uldis (UD)]

Viptela SD-WAN lab with cEdges
LAB is create on EVE-PRO !!! If you will import it in the EVE Communty the all hosts dockers will disappear from lab!
Lab hs uploaded custom 3D topology, it is interactive. After you have started nodes, you can open 3D topology and use it for labbing. nodes are active on click for consoles.

In the lab were used:
Viptela 18.4.4 images
vManage, vBond, vSmart and vEdge 18.4.4
IOL SW i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin
CSRv1000 csr1000vng-universalk9.16.06.07.Everest
CSRv1000 SD-WAN csr1000vng-ucmk9.16.12.1e-sdwan
ASA 9.1.5 with multiconexts
EVE-PRO Docker station Server-gui as management station and for hosts.

how to operate with Viptela licensing you will find in my friend's blog, or use your own sd-wan licenses.
https://pocvlab.com/cisco-sd-wan-vedges ... nboarding/
enjoy
Uldis

[Uldis (UD)]

I sent message to author

[Uldis (UD)]

3D design was provided by 3d icons creator:
https://3d-networking.com/
It is png uploaded nd mapped in EVE lab

[routerman]

I have lab up but trying to use gui interface to vmanage. What needs to be done to get that functional. Sorry, I know it's a basic question but edges is easy enuf with ssh but the gui is more of a challenge for me anyway

[Uldis (UD)]

Oh mate, you have to check some videos them how to get up vmanage

[opfian]

Do you think SDWAN lab can run on machine with Xeon E5-1603 32GB RAM

[Uldis (UD)]

Do you think SDWAN lab can run on machine with Xeon E5-1603 32GB RAM

Sorry but answer is no. this CPU has only 4 cores...
Single vManage node require 4 cores....