Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.
Moderator: mike
-
Soter
- Posts: 22
- Joined: Wed Dec 13, 2017 6:12 pm
Post
by Soter » Sat Feb 15, 2025 1:24 pm
Just patched from 6.x pro to eve-ng-pro 6.2.0-20
Issue was also there before
when exporting cfg from Cisco vIOS L3 the export will come up as success, however the actual config stops at "enable password xxxxx"
here the exported cfg from startup config
Code: Select all
!
! Last configuration change at 13:07:52 UTC Sat Feb 15 2025 by kasper
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Internet_Router
!
boot-start-marker
boot-end-marker
!
!
enable password xxxxx
Works fine with Cisco vIOS L2, and was working on eve 5.x
Br Kasper.
-
rusty725
- Posts: 315
- Joined: Thu Mar 29, 2018 4:19 pm
Post
by rusty725 » Sat Feb 15, 2025 8:34 pm
try a simple password for a test and see if it exports it.
-
Soter
- Posts: 22
- Joined: Wed Dec 13, 2017 6:12 pm
Post
by Soter » Sun Feb 23, 2025 3:57 pm
It is a quite simple password, so I need the support to look at it.
By the way it works on Cisco IOL images
You do not have the required permissions to view the files attached to this post.
-
rusty725
- Posts: 315
- Joined: Thu Mar 29, 2018 4:19 pm
Post
by rusty725 » Sun Feb 23, 2025 8:55 pm
the iol version that you have is very old and has bugs , try these instead
i86bi_linux_l2-adventerprisek9-ms.SSA.high_iron_20190423.bin
i86bi_LinuxL3-AdvEnterpriseK9-M2_157_3_May_2018.bin