Idle-PC calc on c7200
Posted: Thu Jan 09, 2020 9:35 pm
Hi guys
I'm having problems calculating the idle-pc value for the c7200 image. I've tryed every value suggested for the statistics but none works. The process reach 100% and it get stuck in this value.
These are the steps that I've been follow:
1- run this command: dynamips -P 7200 /opt/unetlab/addons/dynamips/c7200-advipservicesk9-mz.152-4.S5.image
2- wait to get in the promp this state: Would you like to enter the initial configuration dialog? [yes/no]
3- do the combo ctrl+] then i
4- use the highest value and test on the lab, adding a 7200 node and changing the value for that one.
All these steps were monitored with "top" command.
could anyone find a useful value ??
Thanx in advance
PS: I've been mounted the eve enviorement over ESXi with 16 CPU and 64G of mem
I'm having problems calculating the idle-pc value for the c7200 image. I've tryed every value suggested for the statistics but none works. The process reach 100% and it get stuck in this value.
These are the steps that I've been follow:
1- run this command: dynamips -P 7200 /opt/unetlab/addons/dynamips/c7200-advipservicesk9-mz.152-4.S5.image
2- wait to get in the promp this state: Would you like to enter the initial configuration dialog? [yes/no]
3- do the combo ctrl+] then i
4- use the highest value and test on the lab, adding a 7200 node and changing the value for that one.
All these steps were monitored with "top" command.
could anyone find a useful value ??
Thanx in advance
PS: I've been mounted the eve enviorement over ESXi with 16 CPU and 64G of mem