Page 1 of 1

XRv 6.5.3 partition usage alert

Posted: Wed Feb 19, 2020 3:08 pm
by bgp-lu
Hello fellas,

I've deployed a XRv (6.5.3) that it is logging this message every 5min:

0/RP0/ADMIN0:Feb 19 14:20:06.711 UTC: mediasvr[2780]: %MEDIASVR-MEDIASVR-4-PARTITION_USAGE_ALERT : High disk usage alert : host /misc/scratch exceeded 100%

Doing a deep research I've tried this steps:

- Zip some files to look if the path's usage decrease at the point were the log stops --> nothing happens, the log continue appearing
- delete the zip-files and other for the same cause ---> same as before

I leave the outputs for more details

Code: Select all

sysadmin-vm:0_RP0# show media 
Wed Feb  19 14:38:44.740 UTC
---------------------------------------------------------------------
Partition                    Size     Used  Percent    Avail
---------------------------------------------------------------------
rootfs:                      2.9G     436M      16%     2.3G
harddisk:                    3.8G     9.2M       1%     3.6G
rootfs:/misc/swtam            47M     316K       1%      43M
log:                         475M      90M      21%     356M
config:                      475M     5.2M       2%     441M
disk0:                       997M     1.6M       1%     927M
install:                     3.8G     689M      19%     2.9G
---------------------------------------------------------------------

Code: Select all

[sysadmin-vm:0_RP0:/misc/scratch]$ls -l
total 156
-rw-r--r-- 1 root root   580 Feb 18 15:26 card_specific_install
drwxr-xr-x 2 root root  4096 Jan 16 13:07 core
-rw-rw-rw- 1 root root 16485 Feb 19 14:33 default-sdr--1_ping_report.out
-rw-rw-rw- 1 root root 80131 Feb 19 13:53 default-sdr--1_ping_report.out.gz
-rw-rw-rw- 1 root root   743 Feb  2 18:00 default-sdr--2_ping_report.out.gz
drwx------ 2 root root 16384 Jan 16 13:07 lost+found
drwxr-xr-x 2 root root  4096 Jan 16 13:09 shelf_mgr_pds
-rw-rw-rw- 1 root root   111 Feb 17 09:34 swt_vmm_cal_vm_dbg_child.out
-rw-rw-rw- 1 root root   274 Feb 17 09:35 swt_vmm_cal_vm_dbg_parent.out
-rw-rw-rw- 1 root root   109 Feb 19 14:33 swt_vmm_ping_child.out
-rw-rw-rw- 1 root root   258 Feb 19 14:33 swt_vmm_ping_parent.out
-rw-rw-rw- 1 root root    67 Feb 19 14:33 swt_vmm_vm_dbg_child.out
-rw-rw-rw- 1 root root   258 Feb 19 14:33 swt_vmm_vm_dbg_parent.out

Code: Select all

Filesystem                                             Size  Used Avail Use% Mounted on
/dev/loop0                                             3.2G  457M  2.5G  16% /
devfs                                                  1.1M  4.1k  1.1M   1% /dev
tmpfs                                                   66k     0   66k   0% /dev/cgroup
tmpfs                                                  8.4G     0  8.4G   0% /var/volatile
tmpfs                                                  8.4G   70k  8.4G   1% /run
tmpfs                                                  8.4G     0  8.4G   0% /media/ram
none                                                   8.4G  799k  8.4G   1% /dev/shm
tmpfs                                                   68M   21k   68M   1% /tmp
none                                                   8.4G  799k  8.4G   1% /dev/shm
tmpfs                                                   68M   21k   68M   1% /tmp
/dev/mapper/panini_vol_grp-ssd_disk1_calvados_1        4.1G  9.6M  3.9G   1% /misc/disk1
/dev/mapper/panini_vol_grp-ssd_disk1_calvados_swtam_1   49M  324k   45M   1% /misc/swtam
/dev/mapper/sysadmin-vm_encrypted_log                  498M   95M  373M  21% /var/log
/dev/mapper/sysadmin-vm_encrypted_config               498M  5.4M  462M   2% /misc/config
/dev/mapper/sysadmin-vm_encrypted_scratch              1.1G  1.7M  972M   1% /misc/scratch
none                                                   525k     0  525k   0% /mnt
/dev/loop15                                            4.1G  723M  3.2G  19% /install_repo
On the other hand, the same version of XRv deployed over ESXi isn't seem to have the same problem.

Any kind of information will be grateful

Regards!

Re: XRv 6.5.3 partition usage alert

Posted: Wed Feb 19, 2020 9:38 pm
by Uldis (UD)
You have to create XRv9K only from ISO
https://www.eve-ng.net/index.php/docume ... -xrv-9000/

Node is up for 1 H no isses