Page 1 of 2
Huawei AR1000v
Posted: Wed Apr 01, 2020 1:16 pm
by tcpip
Hi all,
Im trying to run the ar1000v but Im getting stuck here.
I upgrade the memory but still the same issue.
Thanks.
Re: Huawei AR1000v
Posted: Wed Apr 01, 2020 2:45 pm
by Uldis (UD)
Re: Huawei AR1000v
Posted: Wed Apr 01, 2020 2:50 pm
by tcpip
Yes sir I did but still not working.
Re: Huawei AR1000v
Posted: Wed Apr 01, 2020 3:48 pm
by Uldis (UD)
then you have not ok image...
or try rename converted image to virtioa.qcow2
Console is VNC !!!
Re: Huawei AR1000v
Posted: Wed Apr 01, 2020 4:29 pm
by tcpip
Just tested and not working, I will look for a new image
thanks.
Re: Huawei AR1000v
Posted: Thu Apr 02, 2020 4:54 am
by hbugs001
you need eve-ng version 102 or newer
Re: Huawei AR1000v
Posted: Thu Apr 09, 2020 12:01 am
by verowl
Having the same issue... tcpip. what processor are you using? are you doing that in a bare-metal or virtualized Operational System?
Re: Huawei AR1000v
Posted: Thu Apr 09, 2020 12:02 am
by verowl
Uldis (UD) wrote: ↑Wed Apr 01, 2020 3:48 pm
then you have not ok image...
or try rename converted image to virtioa.qcow2
Console is VNC !!!
What processor are you using and do you can share the MD5 hash of the image with us?
Re: Huawei AR1000v
Posted: Thu Apr 09, 2020 1:54 am
by tcpip
Hi all,
I found a qcow2 that is working, but it comes with configuration, after I erase all the running and restart the router I can log in again, and I think is because the VNC is not letting me put the @ .
Im eve is on the last version and in a vmware.
thanks.
Re: Huawei AR1000v
Posted: Thu Apr 09, 2020 4:58 pm
by verowl
cuild you share with me this image?