Support and News Forum

I have some problems, the static routes does not get populated, is there a bug in the n9k image, ospf and other dynamic routing protocols work, just not static?

Version : nxos.9.2.2.bin


switch# sh ip static-route vrf default

Static-route for VRF "default"(1)
IPv4 Unicast Static Routes:
0.0.0.0/0, configured nh: 192.168.10.80/32
(not installed in urib)
rnh(installed in urib)
10.46.10.0/23, configured nh: 192.168.11.132/32
(not installed in urib)
rnh(installed in urib)


switch# sh ip route
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

Problem is that LACP on the port-channel seems buggy when connected to a ASA so the routes comes and goes.

What ASA is used??