Support and News Forum

Hi,

is there any possible way (even if it's some dark arcana magic) to keep the IOS-XE configs in the nodes when cloning a lab? I have a huge lab and copy&paste every time is way too much work. Especially as I'm using an SDWAN lab so the certificates are lost every time.

Maybe by copying the files in the tmp directory or something?

root@LABUSRAEVENG01:/opt/unetlab/tmp/0/c8229749-4056-4d3a-b470-423cb02da712/55# ls -l
total 1414672
-rw-rw-r-- 1 root unl 0 May 7 16:57 l1down_3
-rw-rw-r-- 1 root unl 0 May 7 15:03 l1down_4
-rw-rw-r-- 1 root unl 0 May 7 15:03 l1down_5
-rw-rw-r-- 1 root unl 0 May 7 15:03 l1down_6
-rw-rw-r-- 1 root unl 0 May 7 15:03 l1down_7
-rw-rw-r-- 1 root unl 0 May 7 16:06 l1up_0
-rw-rw-r-- 1 root unl 0 May 7 16:27 l1up_1
-rw-rw-r-- 1 root unl 0 May 7 15:03 l1up_2
srwxrwxr-x 1 root unl 0 May 7 15:03 mon2-sock
srwxrwxr-x 1 root unl 0 May 7 15:03 mon-sock
srwxrwxr-x 1 root unl 0 May 7 15:03 qmp-sock
-rw-rw-r-- 1 root unl 0 May 7 16:57 suspend_3
-rw-rw-r-- 1 root unl 1448673280 May 12 14:19 virtioa.qcow2
-rw-rw-r-- 1 root unl 0 May 7 15:03 wrapper.txt

Thanks,
Sven.

Soooo...

I did what I proposed.. I cloned the lab and the did a
cp -R /opt/unetlab/tmp/0/<running lab id>/* /opt/unetlab/tmp/0/<new lab id>

The new IOS-XE nodes booted up with their configs. Is there anything else I need to do?

Thanks,
Sven.