Versa LAB requirement

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
sanusijr@gmail.com
Posts: 7
Joined: Fri Apr 17, 2020 12:40 pm

Versa LAB requirement

Post by sanusijr@gmail.com » Mon Jul 12, 2021 11:07 am

Hi Everyone,

I just want to know if Versa Lab would work for a my planned system, which will have the following spec.

i9-10850K (10 Core, 20 Thread) CPU
64GB RAM.

Versa Networks SDWAN basic Lab
Lab requirements: x32 vCPU, 64GB RAM

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Versa LAB requirement

Post by Uldis (UD) » Mon Jul 12, 2021 3:36 pm

you can try and answer it yourself only mate

sanusijr@gmail.com
Posts: 7
Joined: Fri Apr 17, 2020 12:40 pm

Re: Versa LAB requirement

Post by sanusijr@gmail.com » Tue Jul 13, 2021 11:57 am

Hi Uldis,

I'm still planning to build this system and just to make sure if this will be enough for that the versa lab requirement.

i9-10850k has 10C/20T but Versa lab need 32vCPU. would this system capable of running it smoothly?

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Versa LAB requirement

Post by Uldis (UD) » Wed Jul 14, 2021 8:34 am

you can try reduce CPU settings on nodes, but I give you no guarantee if all will run smooth.
Older version 16.1 of viptela need less cpu

sanusijr@gmail.com
Posts: 7
Joined: Fri Apr 17, 2020 12:40 pm

Re: Versa LAB requirement

Post by sanusijr@gmail.com » Wed Jul 14, 2021 8:45 pm

thanks for the comment.

Richard70
Posts: 52
Joined: Sun Dec 23, 2018 9:53 am

Re: Versa LAB requirement

Post by Richard70 » Sun Jul 18, 2021 3:40 pm

Hi,

I'm using 9900k@4.8GHz / 64G for a personal Versa lab (1 Director + 1 standalone analytics + 1 controller + 6 concurrent running vflex (20 in total) ). I'm far below 100 % CPU (no issue at all in regards with CPU & Mem). With 10 concurrent vflex, I'm reaching 90% (note that I'm running also some other non Versa nodes though)
Now if you want to add more vflex nodes, use everywhere active/active HA, and implement a lot of special features, I can't say.
Hopes that helps.

sanusijr@gmail.com
Posts: 7
Joined: Fri Apr 17, 2020 12:40 pm

Re: Versa LAB requirement

Post by sanusijr@gmail.com » Wed Jul 21, 2021 7:09 pm

Thanks Richard, that's a great feedback. :D

Post Reply