Support and News Forum

Hi Guys

I have a bare metal build which is running great, I now want to do some Wireshark captures from my laptop. I've installed the client pack, have run the registry updater and edited the batch file to include my username and password for the server. When I try to capture a device port I get the following error in a cmd prompt and Wireshark opens blank.

tcpdump: vunl3_1_0: You don't have permission to capture on that device
(socket: Operation not permitted)


Any ideas?

Thanks
Rick

Which EVE you installed Pro or Community?
If Pro then need install Dockers
If community, then open Putty SSH session to EVE IP and save SSH key when it ask, then wireshark would start