I have been using the old of version eve-ng and now I have decided to build a new server with eve-ng community V5. I still have old server to compare if I run into issues on my new bare metal build.
Here is the issue:
When I try to boot up Nokia vSIM (I also have valid licenses) it boots up as VSR-I and not as vSIM. It also does not recognize the line card and chassis type I have configured for.
Here is an example:
My Timos line for CPM is:
Code: Select all
slot=A chassis=SR-12 sfm=m-sfm5-12 card=cpm5
Code: Select all
slot=1 chassis=SR-12 card=iom3-xp-c mda/1=m10-1gb-xp-sfp
When it boots up it validates the license file as I can see the following output from the console:
Code: Select all
Looking for cf3:/bof.cfg ... OK, reading
Contents of Boot Options File on cf3:
primary-image cf3:\timos\i386-both.tim
primary-config cf3:\config.cfg
license-file cf3:\lic.txt
autonegotiate
duplex full
speed 100
wait 3
persist off
no li-local-save
no li-separate
console-speed 115200
Hit a key within 1 second to change boot parameters...
Primary image location: cf3:\timos\i386-both.tim
Loading image cf3:\timos\i386-both.tim
Version B-21.7.R2, Wed Sep 15 12:57:16 PDT 2021 by builder in /builds/c/217B/R2/panos/main/sros
text:(82549728-->281783008) + data:(45949056-->183560744)
Current Time: TUE MAY 31 07:51:06 UTC 2022
Loading license file for 'TiMOS-B-21.7.R2' from: cf3:\lic.txt ... OK
Now here is the issue when I login this is what I see (at the command prompt it should say vSIM on the first boot and not VSR-I, my license is for vSIM and not VSR-I):
Code: Select all
ttempting to exec primary configuration file:
'cf3:\config.cfg' ...
Executed 0 lines in 0.0 seconds from file cf3:\config.cfg
Login: admin
Password:
<snip>
A:VSR-I#
Code: Select all
A:VSR-I#
A:VSR-I# show chassis
===============================================================================
System Information
===============================================================================
Name : VSR-I
Type : VSR-I
Chassis Topology : Standalone
Location : (Not Specified)
Coordinates : (Not Specified)
CLLI code :
Number of slots : 2
Oper number of slots : 2
Num of faceplate ports/connectors : 0
Num of physical ports : 0
Base MAC address : 00:00:ff:00:00:00
FP Generations : None
System Profile : none
===============================================================================
Chassis Summary
===============================================================================
Chassis Role Status
-------------------------------------------------------------------------------
1 Standalone up
===============================================================================
Code: Select all
Attempting to exec primary configuration file:
'cf3:\config.cfg' ...
Executed 0 lines in 0.1 seconds from file cf3:\config.cfg
Login: admin
Password:
<snip>
A:vSIM#
Code: Select all
:vSIM# show chassis
===============================================================================
System Information
===============================================================================
Name : vSIM
Type : 7750 SR-12
Chassis Topology : Standalone
Location : (Not Specified)
Coordinates : (Not Specified)
CLLI code :
Number of slots : 12
Oper number of slots : 12
Num of faceplate ports/connectors : 0
Num of physical ports : 0
Critical LED state : Off
Major LED state : Off
Minor LED state : Off
Over Temperature state : OK
Base MAC address : 02:01:ff:00:00:00
Admin chassis mode : d
Oper chassis mode : d
FP Generations : None
System Profile : none
===============================================================================
Chassis Summary
===============================================================================
Chassis Role Status
-------------------------------------------------------------------------------
1 Standalone up
===============================================================================
Code: Select all
A:vSIM# show card
===============================================================================
Card Summary
===============================================================================
Slot Provisioned Type Admin Operational Comments
Equipped Type (if different) State State
-------------------------------------------------------------------------------
1 (not provisioned) up unprovisioned
iom3-xp-c
A cpm5 up up/active
B cpm5 up down/standby
(not equipped)
===============================================================================
Any help will be really appreciated please.