initial node config from another node even if node wiped

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
aldro
Posts: 12
Joined: Wed Sep 14, 2022 1:17 pm

initial node config from another node even if node wiped

Post by aldro » Wed Sep 14, 2022 3:29 pm

Hellow.
I have licensed pro eve-ng and node r6 in imported lab give initial configuratin from another node in defferent older lab.
- how i can troubleshoot and fix this?

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: initial node config from another node even if node wiped

Post by Uldis (UD) » Wed Sep 14, 2022 9:34 pm

Your image is screwed only..used for that R6

try right click and wipe node, then start
also make sure it is not set boot from exported initial configuration !

aldro
Posts: 12
Joined: Wed Sep 14, 2022 1:17 pm

Re: initial node config from another node even if node wiped

Post by aldro » Tue Sep 20, 2022 4:08 pm

after wipe node startup configuration is same and no startup config is configured in node settings
i detect that the behaviors associate with some csr image version and i will try to readd this image to quemu store folder in eve master node
by done this, i update post

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: initial node config from another node even if node wiped

Post by Uldis (UD) » Tue Sep 20, 2022 6:14 pm

Someone had did commit that CSR node, with config on it

aldro
Posts: 12
Joined: Wed Sep 14, 2022 1:17 pm

Re: initial node config from another node even if node wiped

Post by aldro » Wed Oct 12, 2022 3:17 pm

I have couple CSR images and then i add couple node with different images in new LAB and i see different startup hostname in one of started nodes:
csr1000vng-universalk9.16.09.01.Fuji - start with default host name "Router" (67 % cpu in CONFIGURED NODES afer full load node and enter to enable mode)
csr1000vng-universalk9.16.09.06.Fuji - start with non default host name "ASR-MAIN..." (94% cpu in CONFIGURED NODES afer full load node and enter to enable mode)

Then i try reinstall csr1000vng-universalk9.16.09.06.Fuji and then i see "%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Rebooting from HD" i type ctrl+a then c but little bit later:

Code: Select all

root@eve-ng:~/abc# ls
csr1000v-universalk9.16.09.06.iso  virtioa.qcow2
root@eve-ng:~/abc# rm virtioa.qcow2
root@eve-ng:~/abc# ls
csr1000v-universalk9.16.09.06.iso
root@eve-ng:~/abc# /opt/qemu/bin/qemu-img create -f qcow2  virtioa.qcow2 8G
Formatting 'virtioa.qcow2', fmt=qcow2 size=8589934592 encryption=off cluster_size=65536 lazy_refcounts=off refcount_bits=16
root@eve-ng:~/abc# /opt/qemu-2.2.0/bin/qemu-system-x86_64  -nographic -drive file=virtioa.qcow2,if=virtio,bus=0,unit=0,cache=none -machine type=pc-1.0,accel=kvm -serial mon:stdio -nographic -nodefconfig -nodefaults -rtc base=utc -cdrom csr1000v-universalk9.16.09.06.iso -boot order=dc  -m 4096

(process:3769622): GLib-WARNING **: 14:23:17.869: ../../../glib/gmem.c:493: custom memory allocation vtable not supported
Press any key to continue.
Press any key to continue.

    GNU GRUB  version 0.97  (639K lower / 3668984K upper memory)

 +-------------------------------------------------------------------------+
 | csr1000v Virtual (VGA) Console -- 2020-08-27_02.41                      |
 | csr1000v Serial Console -- 2020-08-27_02.41                             |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, or 'c' for a command-line.
  Booting 'csr1000v Serial Console -- 2020-08-27_02.41'

root (cd)
 Filesystem type is iso9660, using whole disk
kernel /packages.conf rw root=/dev/ram quiet console= max_loop=64 HARDWARE=virt
ual SR_BOOT=cdrom0:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
        expected     c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
package header rev 3 structure detected
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   53edcb4f:91a45740:849a31c4:581ee791:e06d9573
        expected     53edcb4f:91a45740:849a31c4:581ee791:e06d9573
Package type:0x7531, flags:0x0
   [Linux-bzImage, setup=0x3c00, size=0x522df0]
   [isord @ 0x7deac000, 0x21431e9 bytes]

%IOSXEBOOT-4-WAIT_FOR_DEVICES: (local/local): Partition "/dev/bootflash1" missing at 20221012142354 Continuing to initialization
%IOSXEBOOT-4-PART_INVALID: (local/local): /dev/bootflash has an invalid partition table that must be repaired.
%IOSXEBOOT-4-PART_REPAIR: (local/local): The system will repair /dev/bootflash now.
%IOSXEBOOT-4-PART_REPAIR: (local/local): This may cause loss of data and configuration on /dev/bootflash.
%IOSXEBOOT-4-PART_REPAIR_FINISHED: (local/local): Partitioning complete.
%IOSXEBOOT-4-PART_SEEDNVRAM: (local/local): Seeding nvram [SUCCESS]
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash1 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash1 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash5 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash5 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash6 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash6 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash7 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash7 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash8 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash8 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-FILESYS_INVALID: (local/local): partition /dev/bootflash9 has an invalid filesystem that must be re-initialized.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): The system will repair /dev/bootflash9 now.
%IOSXEBOOT-4-FILESYS_REPAIR: (local/local): This will cause a complete loss of data.
%IOSXEBOOT-4-BOOT_SRC: (rp/0): CD-ROM Boot
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Using Serial console
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Installing GRUB to /dev/bootflash
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Copying image to /boot
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Copying image to /bootflash
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Creating /boot/grub/menu.lst
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Ejecting CD-ROM tray
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): CD-ROM Installation finished
%IOSXEBOOT-4-BOOT_CDROM: (rp/0): Rebooting from HD

Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
QEMU 2.2.0 monitor - type 'help' for more information
(qemu) quit
root@eve-ng:~/abc# mkdir  /opt/unetlab/addons/qemu/csr1000vng-universalk9.16.09.06.Fuji/
root@eve-ng:~/abc# mv virtioa.qcow2 /opt/unetlab/addons/qemu/csr1000vng-universalk9.16.09.06.Fuji/
root@eve-ng:~/abc# cd
root@eve-ng:~# rm -rf abc
root@eve-ng:~# /opt/unetlab/wrappers/unl_wrapper -a fixpermissions
Oct 12 14:27:43 Oct 12 14:27:43 Online Check state: Valid
root@eve-ng:~#
And int ferst boot CSR loaded with error:
% Failed to initialize nvram
[vmxnet3][WR][vmxnet3_get_command_status]: Received request for unknown commandf
f
f
f
f
adding dispatc.":

Code: Select all

Booting from Hard Disk...
GRUB Loading stage2...

    GNU GRUB  version 0.97  (639K lower / 3144568K upper memory)

 +-------------------------------------------------------------------------+
 | CSR1000v - packages.conf                                                |
 | CSR1000v - GOLDEN IMAGE                                                 |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 |                                                                         |
 +-------------------------------------------------------------------------+
      Use the ^ and v keys to select which entry is highlighted.
      Press enter to boot the selected OS, or 'c' for a command-line.



   The highlighted entry will be booted automatically in 1 seconds.
  Booting 'CSR1000v - packages.conf'

root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
        expected     c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
package header rev 3 structure detected
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   53edcb4f:91a45740:849a31c4:581ee791:e06d9573
        expected     53edcb4f:91a45740:849a31c4:581ee791:e06d9573
Package type:0x7531, flags:0x0
   [Linux-bzImage, setup=0x3c00, size=0x522df0]
   [isord @ 0x7deac000, 0x21431e9 bytes]
%IOSXEBOOT-4-BOOT_SRC: (rp/0): Checking grub versions 1.0 vs 1.0
%IOSXEBOOT-4-BOOT_SRC: (rp/0): No need for bootloader upgrade.

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           Cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software [Fuji], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 02:35 by mcpre



PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.

You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.


% Failed to initialize nvram
[vmxnet3][WR][vmxnet3_get_command_status]: Received request for unknown commandf
                                                                               f
                                                                               f
                                                                               f
                                                                               f
                                                                               adding dispatc.
Processor board ID 9E53ZSYX8ZO
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3984964K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of WebUI ODM Files at webui:.

%INIT: waited 0 seconds for NVRAM to be available


         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:


Press RETURN to get started!


*Oct 12 14:33:56.421: %VUDI-6-EVENT: [serial number: 96BR96EXVS3], [vUDI: CSR1000V:96BR96EXVSd
*Oct 12 14:33:56.422: %VUDI-6-EVENT: [serial number: 96BR96EXVS3], [vUDI: CSR1000V:96BR96EXVSe
*Oct 12 14:33:57.752: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is d
*Oct 12 14:33:58.467: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = csr1000v d
*Oct 12 14:34:48.106: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed
*Oct 12 14:34:51.683: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Oct 12 14:35:01.309: %VUDI-6-EVENT: [serial number: 96BR96EXVS3], [vUDI: ], vUDI initializate
*Oct 12 14:35:01.799: %VUDI-6-EVENT: [serial number: 9E53ZSYX8ZO], [vUDI: CSR1000V:9E53ZSYX8Zd
*Oct 12 14:35:01.801: %VUDI-6-EVENT: [serial number: 9E53ZSYX8ZO], [vUDI: CSR1000V:9E53ZSYX8Ze
*Oct 12 14:35:01.923:  Step 3. deletion of NOT-in-use licenses
*Oct 12 14:35:01.923:  Step 4. deletion of in-use licenses
*Oct 12 14:35:06.637: %VXE_THROUGHPUT-6-LEVEL: Throughput level has been set to 000 kbps
*Oct 12 14:35:10.942: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1, changn
*Oct 12 14:35:11.044: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2, changn
*Oct 12 14:35:11.153: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3, changn
*Oct 12 14:35:11.459: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4, chang.

*Oct 12 14:35:12.914: Notifications initializedSID Manager, completed initialization ...

*Oct 12 14:35:41.041: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Oct 12 14:35:48.549: %VOICE_HA-7-STATUS: CUBE HA-supported platform detected.
*Oct 12 14:36:04.411: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Oct 12 14:36:04.515: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Oct 12 14:36:04.530: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed stap
*Oct 12 14:36:04.546: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed statep
*Oct 12 14:36:04.550: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Oct 12 14:36:04.555: %LINK-3-UPDOWN: Interface GigabitEthernet1, changed state to down
*Oct 12 14:36:04.771: %LICENSE-2-UDI_CHANGED: UDI of this instance changed from OLD: CSR1000VO
*Oct 12 14:36:15.873: %LINK-3-UPDOWN: Interface GigabitEthernet2, changed state to down
*Oct 12 14:36:15.941: %LINK-3-UPDOWN: Interface GigabitEthernet3, changed state to down
*Oct 12 14:36:15.955: %LINK-3-UPDOWN: Interface GigabitEthernet4, changed state to down
*Oct 12 14:36:16.006: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, changed state tp
*Oct 12 14:36:16.012: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, changed state top
*Oct 12 14:36:16.016: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, changed state top
*Oct 12 14:36:16.020: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1, changn
*Oct 12 14:36:16.911: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2, changn
*Oct 12 14:36:17.645: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3, changn
*Oct 12 14:36:17.652: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4, changn
*Oct 12 14:36:27.902: %VXE_THROUGHPUT-3-INVALID_CONFIG: Throughput level was not set or an in.
*Oct 12 14:36:27.904: %VXE_THROUGHPUT-2-LOW_THROUGHPUT: System throughput set to low default t
*Oct 12 14:29:21.008: %IOSXE-3-PLATFORM: R0/0: kernel: Warning: unable to open an initial con.
*Oct 12 14:30:52.182: %CPPDRV-4-CPU_FEATURE: R0/0: cpp_driver: CPP0: CPU lacks feature (AES H.
*Oct 12 14:36:33.676: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Oct 12 14:42:48.167: %LINK-5-CHANGED: Interface GigabitEthernet1, changed state to administrn
*Oct 12 14:42:48.247: %LINK-5-CHANGED: Interface GigabitEthernet2, changed state to administrn
*Oct 12 14:42:48.273: %LINK-5-CHANGED: Interface GigabitEthernet3, changed state to administrn
*Oct 12 14:42:48.313: %LINK-5-CHANGED: Interface GigabitEthernet4, changed state to administrn
*Oct 12 14:42:49.577: %PNP-6-PNP_SAVING_TECH_SUMMARY: Saving PnP tech summary (pnp-tech-disco.
*Oct 12 14:42:51.005: %IOSXE_OIR-6-INSCARD: Card (rp) inserted in slot R1
*Oct 12 14:42:51.011: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Oct 12 14:42:51.014: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Oct 12 14:42:51.497: %AN-6-AN_ABORTED_BY_CONSOLE_INPUT: Autonomic disabled due to User inter.
*Oct 12 14:42:55.141: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Fuji], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 02:35 by mcpre
*Oct 12 14:42:55.537: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Oct 12 14:42:55.538: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
CRYPTO_PKI: setting trustpoint policy TP-self-signed-3170605535 to use keypair TP-self-signed-3170605535% Generating.
*Oct 12 14:43:15.776: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative ti.
*Oct 12 14:43:17.091: %PNP-6-PNP_TECH_SUMMARY_SAVED_OK: PnP tech summary (pnp-tech-discovery-summary) saved successf.
*Oct 12 14:43:17.092: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Config Wizard)
[OK] (elapsed time was 11 seconds)

*Oct 12 14:43:26.569: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-3170605535 has been generated or impe
*Oct 12 14:43:26.574: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Oct 12 14:43:26.753: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified.  Issue "write memory" to save new IOS PKIn
*Oct 12 14:43:27.092: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-3170605535.server has been generatede
Router>
After CSR fuul loaded and i enter to enable mode cpu 92% in CONFIGURED NODES of lab

i configure hostname and wr config

when i add second node in lab with same imange

and then second node full load with enter to enable mode hostname is default "Router", but cpu load 93% in CONFIGURED NODES of lab

and in booting same error appears ageing:
% Failed to initialize nvram
[vmxnet3][WR][vmxnet3_get_command_status]: Received request for unknown command: cafe000f
[vmxnet3][f
f
f
.

Code: Select all

   The highlighted entry will be booted automatically in 1 seconds.
  Booting 'CSR1000v - packages.conf'

root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /packages.conf rw quiet root=/dev/ram console= max_loop=64 HARDWARE=virt
ual SR_BOOT=bootflash:packages.conf
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
        expected     c6b46152:a9b9ee8c:c142c081:1edfa712:85d57549
package header rev 3 structure detected
Calculating SHA-1 hash...done
SHA-1 hash:
        calculated   53edcb4f:91a45740:849a31c4:581ee791:e06d9573
        expected     53edcb4f:91a45740:849a31c4:581ee791:e06d9573
Package type:0x7531, flags:0x0
   [Linux-bzImage, setup=0x3c00, size=0x522df0]
   [isord @ 0x7deac000, 0x21431e9 bytes]
%IOSXEBOOT-4-BOOT_SRC: (rp/0): Checking grub versions 1.0 vs 1.0
%IOSXEBOOT-4-BOOT_SRC: (rp/0): No need for bootloader upgrade.

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           Cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco IOS Software [Fuji], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.6, R)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 02:35 by mcpre



PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
"SOFTWARE"), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.

You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.


% Failed to initialize nvram
[vmxnet3][WR][vmxnet3_get_command_status]: Received request for unknown command: cafe000f
                                                                                         [vmxnet3][f
                                                                                                   f
                                                                                                   f
                                                                                                   .
Processor board ID 9GBSSL0TOQK
4 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
3984964K bytes of physical memory.
7774207K bytes of virtual hard disk at bootflash:.
0K bytes of WebUI ODM Files at webui:.

%INIT: waited 0 seconds for NVRAM to be available


         --- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: no

Would you like to terminate autoinstall? [yes]:


Press RETURN to get started!


*Oct 12 14:58:54.199: %VUDI-6-EVENT: [serial number: 97JGOB9HM5V], [vUDI: CSR1000V:97JGOB9HM5V], A d
*Oct 12 14:58:54.200: %VUDI-6-EVENT: [serial number: 97JGOB9HM5V], [vUDI: CSR1000V:97JGOB9HM5V], A e
*Oct 12 14:58:55.145: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not ald
*Oct 12 14:58:55.621: %IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: Module name = csr1000v Next rd
*Oct 12 14:59:33.737: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM contents failed
*Oct 12 14:59:36.326: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Oct 12 14:59:45.022: %VUDI-6-EVENT: [serial number: 97JGOB9HM5V], [vUDI: ], vUDI initialization ise
*Oct 12 14:59:45.626: %VUDI-6-EVENT: [serial number: 9GBSSL0TOQK], [vUDI: CSR1000V:9GBSSL0TOQK], A d
*Oct 12 14:59:45.629: %VUDI-6-EVENT: [serial number: 9GBSSL0TOQK], [vUDI: CSR1000V:9GBSSL0TOQK], The
*Oct 12 14:59:45.750:  Step 3. deletion of NOT-in-use licenses
*Oct 12 14:59:45.750:  Step 4. deletion of in-use licenses
*Oct 12 14:59:50.360: %VXE_THROUGHPUT-6-LEVEL: Throughput level has been set to 000 kbps
*Oct 12 14:59:54.858: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1, changed stan
*Oct 12 14:59:54.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2, changed stan
*Oct 12 14:59:55.103: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3, changed stan
*Oct 12 14:59:55.309: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4, changed sta.

*Oct 12 14:59:56.728: Notifications initializedSID Manager, completed initialization ...

*Oct 12 15:00:29.697: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Oct 12 15:00:38.249: %VOICE_HA-7-STATUS: CUBE HA-supported platform detected.
*Oct 12 15:01:03.806: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Oct 12 15:01:03.943: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Oct 12 15:01:03.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0, changed state to p
*Oct 12 15:01:03.958: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed state to up
*Oct 12 15:01:03.965: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Oct 12 15:01:03.976: %LINK-3-UPDOWN: Interface GigabitEthernet1, changed state to down
*Oct 12 15:01:04.334: %LICENSE-2-UDI_CHANGED: UDI of this instance changed from OLD: CSR1000V:97JGOK
*Oct 12 15:01:16.593: %LINK-3-UPDOWN: Interface GigabitEthernet2, changed state to down
*Oct 12 15:01:16.642: %LINK-3-UPDOWN: Interface GigabitEthernet3, changed state to down
*Oct 12 15:01:16.686: %LINK-3-UPDOWN: Interface GigabitEthernet4, changed state to down
*Oct 12 15:01:16.735: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, changed state to up
*Oct 12 15:01:16.749: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, changed state to up
*Oct 12 15:01:16.762: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, changed state to up
*Oct 12 15:01:16.765: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1, changed stan
*Oct 12 15:01:17.778: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2, changed stan
*Oct 12 15:01:17.794: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3, changed stan
*Oct 12 15:01:17.801: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4, changed stan
*Oct 12 15:01:28.446: %VXE_THROUGHPUT-3-INVALID_CONFIG: Throughput level was not set or an invalid .
*Oct 12 15:01:28.448: %VXE_THROUGHPUT-2-LOW_THROUGHPUT: System throughput set to low default level t
*Oct 12 14:54:03.230: %IOSXE-3-PLATFORM: R0/0: kernel: Warning: unable to open an initial console.
*Oct 12 14:55:37.039: %CPPDRV-4-CPU_FEATURE: R0/0: cpp_driver: CPP0: CPU lacks feature (AES HW-Assi.
*Oct 12 15:01:34.349: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Oct 12 15:06:19.125: %LINK-5-CHANGED: Interface GigabitEthernet1, changed state to administrativeln
*Oct 12 15:06:19.208: %LINK-5-CHANGED: Interface GigabitEthernet2, changed state to administrativeln
*Oct 12 15:06:19.232: %LINK-5-CHANGED: Interface GigabitEthernet3, changed state to administrativeln
*Oct 12 15:06:19.255: %LINK-5-CHANGED: Interface GigabitEthernet4, changed state to administrativeln
*Oct 12 15:06:21.829: %IOSXE_OIR-6-INSCARD: Card (rp) inserted in slot R1
*Oct 12 15:06:21.837: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Oct 12 15:06:21.840: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Oct 12 15:06:22.430: %AN-6-AN_ABORTED_BY_CONSOLE_INPUT: Autonomic disabled due to User interventio.
*Oct 12 15:06:26.220: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Fuji], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.6, R)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2020 by Cisco Systems, Inc.
Compiled Thu 27-Aug-20 02:35 by mcpre
*Oct 12 15:06:26.802: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Oct 12 15:06:26.805: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Oct 12 15:06:39.918: %PNP-6-PNP_SAVING_TECH_SUMMARY: Saving PnP tech summary (pnp-tech-discovery-s.
CRYPTO_PKI: setting trustpoint policy TP-self-signed-1921080583 to use keypair TP-self-signed-19210.
*Oct 12 15:06:46.909: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an.
*Oct 12 15:06:48.984: %PNP-6-PNP_TECH_SUMMARY_SAVED_OK: PnP tech summary (pnp-tech-discovery-summar.
*Oct 12 15:06:48.985: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Config Wizard)
[OK] (elapsed time was 10 seconds)

*Oct 12 15:06:56.498: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-1921080583 has beene
*Oct 12 15:06:56.507: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Oct 12 15:06:56.973: %PKI-4-NOCONFIGAUTOSAVE: Configuration was modified.  Issue "write memory" ton
*Oct 12 15:06:57.519: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-1921080583.server he
Router>en
Router#
Router#wr
Building configuration...
[OK]
Router#

Post Reply