Hi,
I am using EVE community edition running on vmware workstation 16.0.0 build-16894299 and i am trying to run a NOKIA ROUTER (TIMOS-L-13.0.R13) on it but when it is booting i receive the following message:
!------------------------------------------------------
Timos BOOT LOADER
platformVmRestrict: unsupported apic mode (0)
x2apic is required
HALT SYSTEM.
!-----------------------------------------------------
Does anyone have faced this error or could you help how to fix it?
I was checking on my BIOS setup if there is option with the name x2apic but i did not found.
I share all output information.
#########################################
Total Memory: 1536MB Chassis Type: 0x26
TiMOS-V-13.0.R13 bootrom/i386 ALCATEL ? 7xxx Copyright (c) 2000-2016 Alcatel-Luc ent.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Dec 21 13:48:08 PST 2016 by builder in /rel13.0/b1/R13/panos/main
Looking for boot parameters.
tmInitFloppy, Could not initialize Floppy.
Press any key to stop auto-boot...
0
auto-booting...
boot device : ata=0,2
unit number : 0
processor number : 0
host name : 0.0.0.0
file name : cf3:/timos/i386-boot.tim
ftp password (pw) : *****
flags (f) : 0x8
target name (tn) : vRR
startup script (s) : pl=1
other (o) : sr12#niente_a_r2_6f,lava_r3|22|0
Booting from ata=0,2:cf3:/timos/i386-boot.tim
Loading cf3:/timos/i386-boot.tim ...
Version L-13.0.R13, Wed Dec 21 13:22:46 PST 2016 by builder in /rel13.0/b1/R13/panos/main
text:(1835424-->4291076) + data:(171808-->606764)
Starting at 0x18000000...
(s) boot params: pl=1; setting TgtPf to 0x00000001
Running in a KVM/QEMU virtual machine
ACPI: ctrl-x only supported with PXE boot. (version >= 3)
emGetMacAddr: unit 0 is not VALID
tmInitFloppy, Could not initialize Floppy.
Floppy drive not installed (-1)
Total Memory: 1536MB Chassis Type: 0x2 Core Freq: 2494.327 MHz
TiMOS-L-13.0.R13 boot/i386 ALCATEL SR 7750 Copyright (c) 2000-2016 Alcatel-Lucent.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Dec 21 13:22:46 PST 2016 by builder in /rel13.0/b1/R13/panos/main
TiMOS BOOT LOADER
platformVmRestrict: unsupported apic mode (0)
x2apic is required
HALT SYSTEM
#########################################
Nokia Router HALT SYSTEM
Moderator: mike
-
- Posts: 8
- Joined: Mon Jun 20, 2022 10:00 am
Re: Nokia Router HALT SYSTEM
Hi,
Remove or change this statement in QEMU custom parameters :
-machine type=pc-1.0,accel=kvm
to
-machine type=pc,accel=kvm
or
-machine accel=kvm
But on EVE-NG you could face also a very long boot problem (> 20 mn), even after lastest upgrade to 5.0.1-19, I have not yet found the correct parameters for my nodes or for VMWare to start like they start in EVE-NG 2 (less than 3 mns). Keep looking for it.
Franck.
Remove or change this statement in QEMU custom parameters :
-machine type=pc-1.0,accel=kvm
to
-machine type=pc,accel=kvm
or
-machine accel=kvm
But on EVE-NG you could face also a very long boot problem (> 20 mn), even after lastest upgrade to 5.0.1-19, I have not yet found the correct parameters for my nodes or for VMWare to start like they start in EVE-NG 2 (less than 3 mns). Keep looking for it.
Franck.
-
- Posts: 12
- Joined: Tue Mar 07, 2023 4:31 am
Re: Nokia Router HALT SYSTEM
Hi,
To modify QEMU, delete or modify the following statement:
-pc-1.0 machine type, kvm acceleration
to
-personal-computer machinery, kilovolt-meter acceleration
or
machine acceleration=kvm
But, I have not yet found the necessary parameters for my nodes or for VMWare to start like they do in EVE-NG 2, thus you may also encounter a very long boot problem (> 20 mn) on EVE-NG despite the latest upgrade to 5.0.1-19. (less than 3 mns). Just keep looking till you find it. monkey mart
To modify QEMU, delete or modify the following statement:
-pc-1.0 machine type, kvm acceleration
to
-personal-computer machinery, kilovolt-meter acceleration
or
machine acceleration=kvm
But, I have not yet found the necessary parameters for my nodes or for VMWare to start like they do in EVE-NG 2, thus you may also encounter a very long boot problem (> 20 mn) on EVE-NG despite the latest upgrade to 5.0.1-19. (less than 3 mns). Just keep looking till you find it. monkey mart
-
- Posts: 5067
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Nokia Router HALT SYSTEM
On new EVE Community any Nokia, tested version 21, 22
Booting in 1-2 minutes. No matter if it is single VSR or dual set of CPM+IOM
For single VSR-NG:
Timos line:
Qemu options line:
For dual nodes CPM+IOM
CPM:
Timos line:
Qemu options:
IOM:
Timos line:
Qemu options line:
Booting in 1-2 minutes. No matter if it is single VSR or dual set of CPM+IOM
For single VSR-NG:
Timos line:
Code: Select all
slot=A chassis=sr-1s card=cpm-1s slot=1 card=xcm-1s mda/1=s18-100gb-qsfp28
Code: Select all
-machine type=pc,accel=kvm -serial mon:stdio -nographic -no-user-config -nodefaults -rtc base=utc -cpu host
CPM:
Timos line:
Code: Select all
slot=A chassis=sr-12 card=cpm5
Code: Select all
-machine type=pc,accel=kvm -serial mon:stdio -nographic -no-user-config -nodefaults -rtc base=utc -cpu host
Timos line:
Code: Select all
slot=1 chassis=sr-12 slot=1 card=iom4-e mda/1=me10-10gb-sfp+
Code: Select all
-machine type=pc,accel=kvm -serial mon:stdio -nographic -no-user-config -nodefaults -rtc base=utc -cpu host