Bridging to PC from lab

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
GuyManDude
Posts: 3
Joined: Wed Mar 16, 2022 8:04 pm

Bridging to PC from lab

Post by GuyManDude » Sat Mar 04, 2023 7:45 pm

I added a cloud node to my lab and set it to bridging mode. This should pass through DHCP traffic through to the virtual node connected to the cloud node right?

It didn't work as I expected. I tried the Management and Cloud modes on the cloud node too but nothing worked. Any thoughts would be appreciated.

VMWare Workstation 16
Eve-NG Community Ed

Uldis (UD)
Posts: 5068
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Bridging to PC from lab

Post by Uldis (UD) » Wed Mar 08, 2023 9:00 am

Try to set NAT interface as management/cloud0 for eve and test.
This will answer you if you have problem in your home LAN, or bridged interface to home LAN.
Note: that some wifi NIC adapters still does not work well with vm ware bridge

Post Reply