Palo Alto Image

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
eator
Posts: 1
Joined: Fri Mar 31, 2017 12:28 pm

Palo Alto Image

Post by eator » Fri Mar 31, 2017 12:35 pm

Has anyone managed to get PANOS (paloalto-7.0.1) working in eve-ng yet?
Its boot as far as the below but then no further...



Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2
[Linux-bzImage, setup=0x3600, size=0x29eec0]
Top
ramindia
Posts: 409
Joined: Sun Mar 19, 2017 10:27 pm

Re: Palo Alto Image

Post by ramindia » Fri Mar 31, 2017 6:59 pm

eator wrote: ↑
Fri Mar 31, 2017 12:35 pm
 Has anyone managed to get PANOS (paloalto-7.0.1) working in eve-ng yet?
Its boot as far as the below but then no further...



Booting 'PANOS (sysroot0)'

root (hd0,1)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz ro root=/dev/sda2 init=/sbin/init_single_core console=ttyS
0,9600n8 console=tty0 quiet alternate_root=/dev/vda2 alternate_root=/dev/xvda2
[Linux-bzImage, setup=0x3600, size=0x29eec0]
Palo alto works good..7.X and tested in EVE. as long as you have correct image, and set to VNC.

R!
Top
Post Reply

Return to “EVE-NG Help-Desk”