Support and News Forum

Everybody is good, I met some problems, now installed on exsi or VM installation will be able to start and normal use, but I'm a problem on the physical machine installation, the installation looks everything is ok, stay in initramfs after installation is complete

大家好，我现在安装遇到了一些问题，在exsi或者VM上面安装就能够正常启动和使用，但是我在物理机上面安装就出现了问题，安装看起来一切正常，安装完成后就停留在initramfs

Type exit then system will show you partition with problems.

type fsck /dev/mapper/"partition name listed before" -y

reboot
Tried this method doesn't work, I not only after normal become such, after is the system started in this way, using the hard drive brand new HP p410 array CARDS, normally install ubuntu centos Windows
尝试过这个方法没有效果，我的不是在正常后才变成这样，是装完系统后启动就这样，使用了HP p410阵列卡 硬盘全新，能够正常安装ubuntu centos windows

Install the original ubuntu can successful installation and start the server selection, eve - ng no matter choose what language can normal boot

安装原版ubuntu服务器选择英文可以安装成功并且启动，eve-ng无论选择什么语言都不能正常启动

First question, what is your server where you are trying to install EVE.
What CPU, RAM, HDD.


Bare install, it is very important to do not miss any step. Very important steps are 7, 8.
http://www.eve-ng.net/index.php/documen ... re-install
EVE must have live internet available.

UD

Uldis (UD) wrote: ↑

Fri Mar 02, 2018 8:39 am

First question, what is your server where you are trying to install EVE.
What CPU, RAM, HDD.


Bare install, it is very important to do not miss any step. Very important steps are 7, 8.
http://www.eve-ng.net/index.php/documen ... re-install
EVE must have live internet available.

UD

The server dell C6100 CPU 5670X2 memory 64GB disk 146G X3 array （Array card HP P410 R0）

I now according to you give a link to continue installation time, report will give you more

one question, is Ubuntu installs OK???


UD