Problem starting vsrx-vmdisk-15.1X49-D40.6
Posted: Mon Apr 24, 2017 12:29 pm
Hey
I installed the image vsrx-vmdisk-15.1X49-D40.6.scsi.ova in the Eve-ng.
It's starting but when I telnet it it's stuck with this message:
Any ideas why it's not starts?
Thanks!
I installed the image vsrx-vmdisk-15.1X49-D40.6.scsi.ova in the Eve-ng.
It's starting but when I telnet it it's stuck with this message:
Code: Select all
Loading Linux ...
Kernel panic - not syncing: Out of memory and no killable processes...
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.55-ltsi-WR6.0.0.15_standard #1
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
00000000002000d0 ffff88007c7e97d0 ffffffff8183ba23 ffff88007c7e9848
ffffffff81837303 ffff880000000008 ffff88007c7e9858 ffff88007c7e97f8
ffffffff8110582a 0000000000000000 0000000000000000 0000000000000000
Call Trace:
[<ffffffff8183ba23>] dump_stack+0x19/0x1b
[<ffffffff81837303>] panic+0xc8/0x1cd
[<ffffffff8110582a>] ? get_page_from_freelist+0x26a/0x830
[<ffffffff811022b6>] out_of_memory+0x476/0x480
[<ffffffff8110710a>] __alloc_pages_nodemask+0xa1a/0xa30
[<ffffffff81140c82>] alloc_page_interleave+0x42/0x90
[<ffffffff81141735>] alloc_pages_current+0xf5/0x160
[<ffffffff8114940c>] new_slab+0x31c/0x330
[<ffffffff818397b0>] __slab_alloc.isra.48+0x31f/0x595
[<ffffffff811c9859>] ? sysfs_new_dirent+0x59/0x130
[<ffffffff8114b8ac>] kmem_cache_alloc+0x1fc/0x250
[<ffffffff811c9859>] ? sysfs_new_dirent+0x59/0x130
[<ffffffff811c9859>] sysfs_new_dirent+0x59/0x130
[<ffffffff811c9ca8>] create_dir+0x38/0xe0
[<ffffffff811c9be3>] ? sysfs_addrm_finish+0x33/0xc0
[<ffffffff811c9ffc>] sysfs_create_subdir+0x1c/0x20
[<ffffffff811cba65>] internal_create_group+0x65/0x240
[<ffffffff814ba790>] ? devtmpfs_create_node+0x100/0x130
[<ffffffff811cbc53>] sysfs_create_group+0x13/0x20
[<ffffffff814bb664>] dpm_sysfs_add+0x24/0xb0
[<ffffffff814b2f2b>] device_add+0x38b/0x6e0
[<ffffffff814b329a>] device_register+0x1a/0x20
[<ffffffff813d9f66>] tty_register_device_attr+0xe6/0x220
[<ffffffff813da217>] tty_register_driver+0x157/0x200
[<ffffffff81f31aac>] pty_init+0x177/0x3a2
[<ffffffff81f31935>] ? tty_init+0x13a/0x13a
[<ffffffff810002d2>] do_one_initcall+0x102/0x160
[<ffffffff81ef7ff3>] kernel_init_freeable+0x15b/0x21e
[<ffffffff81ef786f>] ? do_early_param+0x88/0x88
[<ffffffff8184257e>] ? _raw_spin_unlock_irq+0x1e/0x50
[<ffffffff8107101e>] ? finish_task_switch+0x4e/0xe0
[<ffffffff81827e20>] ? rest_init+0x90/0x90
[<ffffffff81827e2e>] kernel_init+0xe/0x190
[<ffffffff8184a2ac>] ret_from_fork+0x7c/0xb0
[<ffffffff81827e20>] ? rest_init+0x90/0x90
Thanks!